Bosch Aerotwin Wiper Blade - Alphard/Vellfire 2015 30" + 13" (A516S)
SKU: 3397014516
Vehicle Make: Toyota
RM88.00
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Overview
The Bosch Aerotwin A516S is a set of two flat wiper blades sized 30" and 13", built for the Toyota Alphard and Vellfire (2015 onward) front windscreen, where the driver and passenger side take different lengths. Aerotwin is Bosch's flat-blade wiper series, built with Power Protection Plus wiper rubber technology. From 1999, Bosch's Aerotwin design was the first to do without multipart joints: two pre-bent spring strips press the rubber evenly against the glass, and the flatter profile reduces wind noise compared with a framed blade. Later Aerotwin generations added a rubber coating for smoother gliding. In use, the even contact pressure and flat profile give consistent wiping across the glass with less wind noise at speed, and each blade fits with a pre-assembled Special Clip adapter for Toyota's original wiper-arm connector — no separate hardware to source.
Compatibility
- TOYOTA · ALPHARD III 2.5 · 2015–NOW
- TOYOTA · ALPHARD III 2.5 4X4 · 2015–NOW
- TOYOTA · ALPHARD III 3.5 · 2015–NOW
- TOYOTA · ALPHARD III 3.5 · 2018–NOW
- TOYOTA · VELLFIRE 2.5 · 2015–NOW
- TOYOTA · VELLFIRE 2.5 4X4 · 2015–NOW
- TOYOTA · VELLFIRE 3.5 · 2015–NOW
Key Features
- Two-blade front set: 30" driver-side blade + 13" passenger-side blade, sized for the Toyota Alphard/Vellfire (2015 onward) front windscreen
- Flat-blade design with no multipart joints — two pre-bent spring strips give even contact pressure across the glass
- Flatter profile than a framed blade, reducing wind noise at speed
- Power Protection Plus wiper rubber technology for consistent wiping performance
- Special Clip adapter, pre-assembled for Toyota's original wiper-arm connector — no extra hardware needed
- Packed 5 sets per box
- Confirmed fit on 7 catalogue applications, all Toyota Alphard/Vellfire III variants — check the compatibility table before ordering
Specifications
| Blade Construction | Flat blade with no multipart joints; two pre-bent spring strips press the blade evenly against the glass for consistent contact pressure and a flatter profile that reduces wind noise |
| Wiping Rubber | Power Protection Plus wiper rubber technology |
Directions for Use
Manufacturer directions not available for this product — refer to the product label.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is included in this set?
Two Bosch Aerotwin wiper blades — one pair for one front windscreen. Recorded sizes: 30" + 13" (A516S).
Which vehicles is this part number confirmed to fit?
This page lists the confirmed Bosch catalogue applications (7) in the Structured Compatibility table above, all Toyota Alphard/Vellfire III. Vehicles that are not listed have no confirmed application for A516S — check the table for your exact variant and year before ordering.
Which wiper arm type does this set need?
Adaptor type recorded for this SKU: Special Clip, pre-assembled for Toyota's original wiper-arm connector.
How does Bosch Aerotwin differ from Bosch's other wiper series?
Aerotwin is Bosch's flat-blade series with no multipart joints — two pre-bent spring strips give even contact pressure and a flatter, quieter profile. Advantage uses a conventional framed-blade design instead — the right series depends on your vehicle's wiper arm and original equipment.
How is this set packaged?
Pack quantity recorded for this SKU: 5/box.