H&R AUDI B6 B7 2001> Sport Spring
SKU: 29369-1
Vehicle Make: Audi
RM1,470
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- AUDI · A4
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Tieferlegung des Aufbaus bis zu ca. 35 mm (je nach Typ und Fahrzeugausführung) durch Verwendung anderer Federn. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1 / axle 2) | 14.0 mm / 14.0 mm |
| Total number of coils (axle 1 / axle 2) | 7.5 / 7.0 |
| Untensioned length (axle 1 / axle 2) | 305 mm / 255 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Approval documentation | Teilegutachten 02TG0674-08, 2012-11-19; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | 593] 8E QB6 3R Audi A4, Audi A4 DTM Edition EXEO, EXEO ST Limousine, Avant (Frontantrieb) Limousine, Kombi 1220 / 1095 1090 / 1100 1135 / 1135 e1*98/14*0151* . . e1*2001/116*0151* . . e1*2001/116*0243* . . e9*2001/116*0072* . . *) zuletzt geändert durch die Richtlinie 2006/96/EG |
| Permissible axle loads, front/rear | 1220 / 1095 kg; 1090 / 1100 kg; 1135 / 1135 kg |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 02TG0674-08: Tieferlegung des Aufbaus bis zu ca. 35 mm (je nach Typ und Fahrzeugausführung) durch Verwendung anderer Federn.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 02TG0674-08), dated 2012-11-19, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted; on vehicles with a load-dependent brake pressure controller, this is to be reset to the unladen level (per manufacturer instructions).
Source: official_technical_document · 2026-09-02