H&R AUDI A4 B9 4WD S-LINE, A5 B9 SPORTBACK 4WD Sport Spring
SKU: 28757-5
Vehicle Make: Audi
RM1,710
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- AUDI · A4 B9 A5
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about 35 mm *) (depends on the vehicle version) by using special springs. *) ca. 15 mm weniger für Fahrzeuge mit Sportfahrwerk (S line Sportfahrwerk) about 15 mm less for vehicles with sport-suspension (S line sport suspension |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1 / axle 2-I / axle 2-II / axle 2-III / axle 2-IV / axle 2-V / axle 2-VI / axle 2-VII) | 13.25 mm / 13.5 mm / 13.75 mm / 13.75 mm / 13.75 mm / 13.5 mm / 13.5 mm / 14.0 mm |
| Total number of coils (axle 1 / axle 2-I / axle 2-II / axle 2-III / axle 2-IV / axle 2-V / axle 2-VI / axle 2-VII) | 6.75 / 6.75 / 6.7 / 7.0 / 7.0 / 7.5 / 7.5 / 7.4 |
| Untensioned length (axle 1 / axle 2-I / axle 2-II / axle 2-III / axle 2-IV / axle 2-V / axle 2-VI / axle 2-VII) | 273 mm / 274 mm / 271 mm / 259 mm / 273 mm / 258 mm / 266 mm / 260 mm |
| External diameter (axle 1 / axle 2-I / axle 2-II / axle 2-III / axle 2-IV / axle 2-V / axle 2-VI / axle 2-VII) | 117 mm / 124 mm / 124.6 mm / 118 mm / 118 mm / 116 mm / 116 mm / 117 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28757 ** VA (F)` · `28757 ** HA (R)` · `28757 VA (F)` · `28757-3 VA (F)` · `28757 HA (R)` · `28757-5 HA (R)` |
| Approval documentation | Teilegutachten 162XT0001-08, 17.09.2021; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | v / h) in kg (front / rear) in kg Audi / 0588 B8 “F4” T) (B9) A4, S4 TFSI Vorfacelift Limousine / sedan F) e1*2001/116*0430*35 - 60 1175 / 1155 A4 X), S4 TFSI Vorfacelift Avant / station wagon F) e1*2001/116*0430*35 - 60 1175 / 1220 S4 TDI Facelift Limousine / sedan e1*2001/116*0430*60 - . . 1255 / 1215 S4 TDI Facelift Avant / station wagon e1*2001/116*0430*60 - . . 1255 / 1250 B8 “F5” T) A5 F), S5 TFSI Vorfacelift F) Coupé, Cabriolet, Sportback e1*2001/116*0430*43 - 60 1260 / 1245 S5 TDI Facelift: Coupé, Sportback S5 TFSI Facelift: Cabriolet e1*2001/116*0430*60 - . . 1260 / 1250 |
| Permissible axle loads, front/rear | 1175 / 1155 kg; 1175 / 1220 kg; 1255 / 1215 kg; 1255 / 1250 kg |
| Official test result | "no negative effects on the operational safety and road- worthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 162XT0001-08: Lowering of the body up to about 35 mm *) (depends on the vehicle version) by using special springs. *) ca. 15 mm weniger für Fahrzeuge mit Sportfahrwerk (S line Sportfahrwerk) about 15 mm less for vehicles with sport-suspension (S line sport suspension
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 162XT0001-08), dated 17.09.2021, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.
Source: official_technical_document · 2026-09-02