H&R AUDI Q3 F3 4WD INCLUDE SPORTBACK 2018> Sport Spring
SKU: 28656-2
Vehicle Make: Audi
RM1,780
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- AUDI · Q3
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ca. 35 mm *) (depending on the vehicle version) by using different springs. *) RS Q3 incl. Sportback: bis zu 25 mm / up to 25 mm |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 13.0 mm / 13.25 mm / 13.0 mm / 13.0 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 4.7 / 4.7 / 9.8 / 9.7 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 253 mm / 258 mm / 312 mm / 332 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 148 mm / 148 mm / 114 mm / 113 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28656-1 VA (F)` · `28656-1 HA (R)` · `28656-2 VA (F)` · `28656-2 HA (R)` |
| Approval documentation | Teilegutachten 192XT0069-03, 02.06.2020; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | TG) AUDI 0588 F3 Q3, Q3 Sportback 2WD / 4WD (quattro) 1210 / 1150 e1*2007/46*1900* . . Audi Sport 1860 RS Q3 RS Q3 Sportback 1140 / 1195 e1*2007/46*2038* . . A) auch für Fahrzeuge mit adaptiver Dämpferregelung / incl. vehicles with adaptive suspension S) auch für Fahrzeuge mit Sportfahrwerk / incl. vehicles with sport suspension TG) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EU) Nr. 2019/543 with regard to Directive 2007/46/EC, as last amended by Regulation (EU) No. 2019/543 |
| Permissible axle loads, front/rear | 1210 / 1150 kg; 1140 / 1195 kg |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 192XT0069-03: Lowering of the body up to about ca. 35 mm *) (depending on the vehicle version) by using different springs. *) RS Q3 incl. Sportback: bis zu 25 mm / up to 25 mm
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 192XT0069-03), dated 02.06.2020, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02