H&R AUDI RS3 8Y SPORTBACK/ SEDAN 2021> Sport Spring
SKU: 28617-3
Vehicle Make: Audi
RM1,960
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- AUDI · RS3 8Y
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to 45 mm *) (depending on the vehicle variant / version) by using special springs. *) Weitere Angaben zur Tieferlegung des Aufbaus: siehe IV.1.5. / Further information about lowering of the body see IV.1.5. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 12.25 mm / 12.25 mm / 12.25 mm / 13.0 mm / 13.25 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 5.7 / 5.25 / 9.0 / 9.0 / 7.7 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 252.0 mm / 225.0 mm / 296.0 mm / 315.0 mm / 262.0 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 137.0 mm / 134.0 mm / 108.0 mm / 118.0 mm / 105.0 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | geändert / modified |
| Coil markings | `28617-** VA (F)` · `28617-** HA (R)` · `28617-1 VA (F)` · `28617-2 VA (F)` · `28617-1 HA (R)` · `28617-2 HA (R)` |
| Approval documentation | Teilegutachten 212XT0001-07, 12.11.2024; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751 |
| Application range (as printed) | Audi / 0588 GY (“8Y”) A3 40 TFSI/TDI, S3: Limousine + Sportback, 4WD (quattro) 1120 / 1030 e1*2007/46*2060* . . +) Audi Sport / 1860 GY (“8Y”) RS 3 Limousine + Sportback 1105 / 1080 e1*2007/46*2144* . . +) Seat (E) / 7593 KL Seat Leon Sportstourer, Cupra Leon Sportstourer VZ: 4WD (4Drive) 1110 / 1100 e9*2007/46*3167* . . ++) Skoda (CZ) / 8004 NX Octavia incl. RS Limousine + Combi S) 4WD (4x4) 1110 / 1150 e8*2007/46*0355* . . +) Volkswagen- VW / 0603 CD Golf 8 R 4WD (4Motion) 1110 / 990 e1*2007/46*2014* . . +) CDV Golf 8 R Variant 4WD (4Motion) 1090 / 1100 e1*2007/46*2180* . . +) A) auch für Fahrzeuge mit elektronischer Dämpferregelung / also for vehicles with electronic damper control R) auch für Fahrzeuge mit serienmäßigem Sportfahrwerk / also for vehicles with standard sport suspension S) Nicht für Fahrzeugausführung „Scout“ / not for vehicle version ”Scout” +) in Bezug auf die Richtli |
| Official test result | "no negative effects on the operational safety and road- worthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 212XT0001-07: Lowering of the body up to 45 mm *) (depending on the vehicle variant / version) by using special springs. *) Weitere Angaben zur Tieferlegung des Aufbaus: siehe IV.1.5. / Further information about lowering of the body see IV.1.5.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 212XT0001-07), dated 12.11.2024, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.
Source: official_technical_document · 2026-09-02