MYDriveHubs
← Back

H&R BMW E46 SEDAN + CABRIO 316-330 Sport Spring

SKU: 29485-1

Vehicle Make: BMW

RM1,350

Quantity

Shipping & returns

Dispatch time is confirmed via WhatsApp.

Compatibility

  • BMW · E46

Key Features

  • Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
  • Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
  • Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
  • Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
  • Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
  • 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
  • Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.

Specifications

Lowering (official) Tieferlegung des Aufbaus bis zu ca. 35 / 20 mm (Achse 1 / Achse 2) ( je nach Typ und Fahrzeugausführung) durch Verwendung anderer Federn.
Spring type Stahl-Schraubendruckfedern (steel coil springs)
Wire diameter (axle 1 / axle 2) 14.0 mm / 14.5 mm
Total number of coils (axle 1 / axle 2) 4.25 / 8.0
Corrosion protection Powder coating (Kunststoffbeschichtung)
Approval documentation Teilegutachten 82TG0241-04; basis: VdTÜV-Merkblatt Nr. 751
Application range (as printed) C)i, 318(C)i, 318D, 320(C)i, 323(C)i, 325(C)i, 328(C)i, 330(C)i, 320(C)D, 330(C)D 316TI, 318TI, 318TD, 320TD, 325TI 1030 / 1165*) *) 1215 bei Anhängerbetrieb e1*97/27//96/79*0097* . . e1*98/14*0097* . . e1*98/14//2001/116*0112* . . e1*98/14//2001/116*0146* . . e1*98/14//2001/116*0167* . .

Installation

Professional installation is recommended for this product.

Book an Appointment

Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.

FAQ

What is the official lowering of this H&R Sport Spring?

Per the Teilegutachten 82TG0241-04: Tieferlegung des Aufbaus bis zu ca. 35 / 20 mm (Achse 1 / Achse 2) ( je nach Typ und Fahrzeugausführung) durch Verwendung anderer Federn.

Source: official_technical_document · 2026-09-02

What approval documentation does this spring carry?

Teilegutachten (Nr. 82TG0241-04), issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.

Source: official_technical_document · 2026-09-02

What must be checked after installation?

Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted; on vehicles with a load-dependent brake pressure controller, this is to be reset to the unladen level (per manufacturer instructions).

Source: official_technical_document · 2026-09-02