H&R BMW 6 SERIES COUPE 2wd 640i +640d 2012> Sport Spring
SKU: 28947-4
Vehicle Make: BMW
RM1,980
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- BMW · F13
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about 35 mm *) (depending on the vehicle version) by using different springs and Height reduction of the air suspension at axle 2 (5K only). *) 5K : Achse 2/Axle 2: 15 mm 6C: 30/15 mm (A |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 13.5 mm / 13.5 mm / 12.5 mm / 13.0 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 7.5 / 7.6 / 7.8 / 8.8 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 297 mm / 305 mm / 330 mm / 283 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `H&R 28947 VA (F)` · `H&R 28947 HA (R)` |
| Approval documentation | Teilegutachten 102XT0068-14, 2018-06-27; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | BAYER.MOT.WERKE- BMW 0005 5L 5K *) 6C **) 520i, 523i, 528i, 530i, 535i, 550i, 520d, 525d, 530d, 535d, M550d xDrive 640i, 650i, 640d 1250 / 1330 1240 / 1450 1260 / 1340 e1*2007/46*0363* . . e1*2007/46*0455* . . e1*2007/46*0562* . . *) mit Luftfederung an Achse 2 / with air suspension at axle 2 **) Cabrio/Convertible, Coupé, Gran Coupé (Limousine/Sedan) ***) 2WD, 4WD/xDrive, EfficientDynamics Edition ****) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EG) Nr. 195/2013 with regard to Directive 2007/46/EC, as last amended by Regulation (EC) No. 195/2013 |
| Permissible axle loads, front/rear | 1250 / 1330 kg; 1240 / 1450 kg; 1260 / 1340 kg |
| Official note | Niveauregulierung nicht zulässig. |
| Official note (2) | Height reduction of the air suspension at axle 2 (5K only). |
| Official note (3) | Absenkung des Höhenstandes der Luftfederung an Achse 2 (nur 5K). |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 102XT0068-14: Lowering of the body up to about 35 mm *) (depending on the vehicle version) by using different springs and Height reduction of the air suspension at axle 2 (5K only). *) 5K : Achse 2/Axle 2: 15 mm 6C: 30/15 mm (A
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 102XT0068-14), dated 2018-06-27, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02