MYDriveHubs
← Back

H&R BMW 1 SERIES F40 X DRIVE Sport Spring

SKU: 28635-2

Vehicle Make: BMW

RM1,670

Quantity

Shipping & returns

Dispatch time is confirmed via WhatsApp.

Compatibility

  • BMW · F40
  • BMW · F44

Key Features

  • Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
  • Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
  • Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
  • Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
  • Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
  • 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
  • Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.

Specifications

Lowering (official) Lowering of the body up to 45 mm *) (depending on the vehicle variant / version, less lowering for vehicles with standard lowering) by using special springs. *) Weitere Angaben zur Tieferlegung des Aufbaus: siehe IV.1.5. / Further information about lowerin
Spring type Stahl-Schraubendruckfedern (steel coil springs)
Wire diameter (axle 1-I / axle 1-II / axle 1-III / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) 13.25 mm / 14.0 mm / 14.0 mm / 12.5 mm / 12.25 mm / 13.0 mm / 14.0 mm
Total number of coils (axle 1-I / axle 1-II / axle 1-III / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) 4.45 / 4.5 / 4.5 / 6.75 / 5.8 / 6.8 / 5.8
Untensioned length (axle 1-I / axle 1-II / axle 1-III / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) 238.4 mm / 230.0 mm / 238.0 mm / 228.3 mm / 222.7 mm / 240.0 mm / 225.0 mm
External diameter (axle 1-I / axle 1-II / axle 1-III / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) 151.0 mm / 158.0 mm / 150.8 mm / 104.5 mm / 117.5 mm / 117.0 mm / 120.0 mm
Corrosion protection Powder coating (Kunststoffbeschichtung)
Bump stop, spring travel (max.) Standard
Coil markings `28635- ** VA (F)` · `28635- ** HA (R)` · `28635-1 VA (F)` · `28635-2 VA (F)` · `28635-3 VA (F)` · `28635-1 HA (R)`
Approval documentation Teilegutachten 202XT0058-05, 19.03.2024; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751
Application range (as printed) BMW (D) / 0005 F1H 1er Reihe / 1 series Limousine / sedan (F40) incl. xDrive, incl. M135i 2WD: 1085 / 990 4WD: 1120 / 1020 e1*2007/46*2018* . . ++) F2GC 2er Reihe / 2 series Gran Coupé (F44) incl. xDrive, incl. M235i 2WD: 1110 / 1020 4WD: 1140 / 1060 e1*2007/46*2064* . . ++) U2AT 2er Reihe / 2 series Active Tourer (U06) incl. xDrive 2WD: 1120 / 1050 4WD: 1175 / 1110 e1*2018/858*00117* . . +) U1X X Reihe / X series X1 (U11), sDrive + xDrive, incl. M35i 2WD: 1135 / 1080 4WD: 1170 / 1190 e1*2018/858*00153* . . +) U2X X Reihe / X series X2 (U10), sDrive + M35i xDrive 2WD: 1145 / 1100 4WD: 1170 / 1190 e1*2018/858*00371* . . +) UMX Mini Countryman S All4, JCW Countryman ALL4 (U25) 1155 / 1185 e1*2018/858*00370* . . +) A) incl. elektronischer Stoßdämpferregelung / also with electronic adjustable dampers M) auch für Fahrzeuge mit M-Sportfahrwerk / also for vehicles with M-sport suspension V) Auf
Official test result "no negative effects on the operational safety and road- worthiness of the vehicle were noticed."

Installation

Professional installation is recommended for this product.

Book an Appointment

Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.

FAQ

What is the official lowering of this H&R Sport Spring?

Per the Teilegutachten 202XT0058-05: Lowering of the body up to 45 mm *) (depending on the vehicle variant / version, less lowering for vehicles with standard lowering) by using special springs. *) Weitere Angaben zur Tieferlegung des Aufbaus: siehe IV.1.5. / Further information about lowerin

Source: official_technical_document · 2026-09-02

What approval documentation does this spring carry?

Teilegutachten (Nr. 202XT0058-05), dated 19.03.2024, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.

Source: official_technical_document · 2026-09-02

What must be checked after installation?

Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.

Source: official_technical_document · 2026-09-02