H&R BMW F90 M5 + COMPETITION Sport Spring
SKU: 28686-1
Vehicle Make: BMW
RM2,540
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- BMW · F90 M5
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ca. 30 mm *) (depending on the vehicle version) by using different springs. *) M5 Competition: bis zu ca. 20 mm / up to about ca. 20 mm |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 14.0 mm / 14.5 mm / 12.5 mm / 12.5 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 6.2 / 5.8 / 9.6 / 9.7 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 276.0 mm / 265.0 mm / 330.0 mm / 325.1 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 118.0 mm / 118.5 mm / 116.0 mm / 116.0 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28686- ** VA (F)` · `28686- ** HA (R)` · `28686-1 VA (F)` · `28686-2 VA (F)` · `28686-1 HA (R)` · `28686-2 HA (R)` |
| Approval documentation | Teilegutachten 182XT0134-04, 02.11.2020; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | BMW M 7909 F5LM M5 (F90) incl. Competition 1215 / 1260 e1*2007/46*1828* . . F8CM M8 - incl. Competition - Cabrio / convertible (F91) - Coupé (F92) - Gran Coupé (F93) 1215 / 1260 1200 / 1230 1230 / 1240 e1*2007/46*2019* . . A) nur mit adaptivem Fahrwerk mit Dämpferegelung / only with adaptive suspension with adjustable dampers +) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EU) Nr. 2019/543 with regard to Directive 2007/46/EC, as last amended by Regulation (EU) No. 2019/543 |
| Permissible axle loads, front/rear | 1215 / 1260 kg; 1200 / 1230 kg; 1230 / 1240 kg |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 182XT0134-04: Lowering of the body up to about ca. 30 mm *) (depending on the vehicle version) by using different springs. *) M5 Competition: bis zu ca. 20 mm / up to about ca. 20 mm
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 182XT0134-04), dated 02.11.2020, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02