MYDriveHubs
← Back

H&R BMW M4 X-DRIVE 4WD + COMPETITION Sport Spring

SKU: 28616-4

Vehicle Make: BMW

RM2,550

Quantity

Shipping & returns

Dispatch time is confirmed via WhatsApp.

Compatibility

  • BMW · G82

Key Features

  • Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
  • Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
  • Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
  • Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
  • Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
  • 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
  • Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.

Specifications

Lowering (official) Lowering of the body up to 30 mm *) (depending on the vehicle variant/version) by using special springs. *) Siehe IV.1.5.: Weitere Angaben zur Tieferlegung des Aufbaus / See IV.1.5.: Further information about lowering of the body
Spring type Stahl-Schraubendruckfedern (steel coil springs)
Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) 13.25 mm / 13.25 mm / 14.0 mm / 14.0 mm / 14.0 mm / 15.5 mm
Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) 4.0 / 4.0 / 8.8 / 8.9 / 8.9 / 8.75
Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) 217.0 mm / 217.0 mm / 305.0 mm / 289.0 mm / 300.0 mm / 299.0 mm
External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) 158.0 mm / 157.2 mm / 98.5 mm / 99.0 mm / 99.0 mm / 105.0 mm
Corrosion protection Powder coating (Kunststoffbeschichtung)
Bump stop, spring travel (max.) geändert / modified
Coil markings `28616- ** VA (F)` · `28616- ** HA (R)` · `28616-1 VA (F)` · `28616-2 VA (F)` · `28616-1 HA (R)` · `28616-2 HA (R)`
Approval documentation Teilegutachten 212XT0034-05, 13.09.2023; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751
Application range (as printed) BMW M / 7909 G2M M2 Coupé (G87), 2WD 1075 / 1135 e1*2018/858*00211* . . ++) G234M M3 Limousine / Sedan (G80) incl. Competition, incl. xDrive / M xDrive 2WD: 1080 / 1180 xDrive: 1125 / 1200 e1*2018/858*00003* . . +) M3 Touring (G81) Kombilimousine / Station wagon Competition M xDrive 1125 / 1275 M4 Coupé (G82) incl. Competition, incl. xDrive / M xDrive 2WD: 1075 / 1135 xDrive: 1120 / 1150 M4 Cabrio / Convertible (G83) incl. Competition nur / only: xDrive / M xDrive 1160 / 1265 G34MKS M3 CS (G80) 4WD, Limousine / Sedan 1125 / 1200 e1*KS18/858*00008* . . ++) A) nur für Fahrzeuge mit adaptiver Dämpferregelung / only for vehicles with adaptive dampers +) in Bezug auf die Verordnung (EU) 2018/858, zuletzt geändert durch die Verordnung (EU) 2019/2144 with regard to Regulation (EU) 2018/858, as last amended by Regulation (EU) No. 2019/2144 ++) in Bezug auf die Verordnung (EU) 2018/858, zuletzt g
Permissible axle loads, front/rear 1075 / 1135 kg; 1080 / 1180 kg; 1125 / 1200 kg; 1125 / 1275 kg
Official test result "no negative effects on the operational safety and road- worthiness of the vehicle were noticed."

Installation

Professional installation is recommended for this product.

Book an Appointment

Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.

FAQ

What is the official lowering of this H&R Sport Spring?

Per the Teilegutachten 212XT0034-05: Lowering of the body up to 30 mm *) (depending on the vehicle variant/version) by using special springs. *) Siehe IV.1.5.: Weitere Angaben zur Tieferlegung des Aufbaus / See IV.1.5.: Further information about lowering of the body

Source: official_technical_document · 2026-09-02

What approval documentation does this spring carry?

Teilegutachten (Nr. 212XT0034-05), dated 13.09.2023, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.

Source: official_technical_document · 2026-09-02

What must be checked after installation?

Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.

Source: official_technical_document · 2026-09-02