H&R FORD MK3 2011-2014 Sport Spring
SKU: 28927-3
Vehicle Make: Ford
RM1,470
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- FORD · FOCUS
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about 35 mm*) (depending on the vehicle type and version) by using different springs. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 13.5 mm / 13.5 mm / 11.5 mm / 11.0 mm / 13.25 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 6.4 / 6.4 / 9.1 / 8.5 / 8.5 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 277 mm / 297 mm / 317 mm / 319 mm / 340 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `H&R 28927 VA (F)` · `H&R 28927 HA (R)` |
| Approval documentation | Teilegutachten 102XT0249-07, 2015-10-14; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | Ford (D) [8566] DXA DYB C-MAX, Grand C-MAX Focus, Focus Turnier, Focus ST, Focus ST Turnier 1135 / 1020 1175 / 1250 1100 / 1055 1100 / 1135 1070 / 1025 e13*2007/46*1103*.. e13*2007/46*1138*00 – 11 *) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EG) Nr. 195/2013 with regard to Directive 2007/46/EC, as last amended by Regulation (EC) No. 195/2013 |
| Permissible axle loads, front/rear | 1135 / 1020 kg; 1175 / 1250 kg; 1100 / 1055 kg; 1100 / 1135 kg |
| Official note | Vehicles with level control shall not be retrofitted in the way described above. |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 102XT0249-07: Lowering of the body up to about 35 mm*) (depending on the vehicle type and version) by using different springs.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 102XT0249-07), dated 2015-10-14, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted; on vehicles with a load-dependent brake pressure controller, this is to be reset to the unladen level (per manufacturer instructions).
Source: official_technical_document · 2026-09-02