H&R HONDA CITY GEN 6 2014>, GG GK 2008> 2015>, Sport Spring
SKU: 29003-1
Vehicle Make: Honda
RM1,340
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- HONDA · CITY/ JAZZ
- HONDA · CITY/ JAZZ
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Up to about 30 mm (GK: ca. 35 mm), depending on the vehicle type and version |
| Spring type | Steel coil springs (Stahl-Schraubendruckfedern) |
| Wire diameter (axle 1 / axle 2-I / axle 2-II) | 12.25 mm / 11.0 mm / 11.5 mm |
| Total number of coils (axle 1 / axle 2-I / axle 2-II) | 6.75 / 8.5 / 8.5 |
| Untensioned length (axle 1 / axle 2-I / axle 2-II) | 305 mm / 290 mm / 298 mm |
| External diameter (axle 1 / axle 2-I / axle 2-II) | 141 mm / 119 mm / 119 mm |
| Corrosion protection | Powder coating |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | Axle 1: `H&R 29003 VA (F)` · Axle 2 version I (Jazz): `H&R 29003 HA (R)` · Axle 2 version II (CR-Z): `H&R 29003-2 HA (R)` |
| Approval documentation | TÜV Rheinland Teilegutachten (Expert Opinion) Nr. 82XT0282-05, 2022-05-23; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751, Annex II (12/2020) |
| Application range (as printed) | Honda Jazz (GG1, GG2, GG3, GG5, GG6, GE6), Jazz (ZF1), Jazz (GK) — Honda Motor (J) 7100, Honda (GB, RC) 2131/7475; CR-Z (ZF1) |
| Permissible axle loads, front/rear | GG/GE: 840 / 860 kg · ZF1 (CR-Z): 830 / 720 kg · GK: 855 / 835 kg |
| Official note | "Vehicles with level control shall not be retrofitted in the way described above." (Niveauregulierung not permitted) |
| Official test result | "Under operating conditions as are usual in traffic, no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the TÜV Rheinland Teilegutachten 82XT0282-05: lowering of the body up to about 30 mm (GK: approx. 35 mm), depending on the vehicle type and version.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
TÜV Rheinland Teilegutachten (Expert Opinion) Nr. 82XT0282-05, dated 2022-05-23, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: the headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted; on vehicles with a load-dependent brake pressure controller, this is to be reset to the unladen level (per manufacturer instructions); the conversion is not permitted on vehicles with level control (Niveauregulierung).
Source: official_technical_document · 2026-09-02
Does the official documentation cover the Honda City Gen 6 (2014>) / City Hatchback GN5 applications listed for this part?
The captured TÜV Rheinland Teilegutachten 82XT0282-05 for 29003-1/-2 covers Honda Jazz/CR-Z chassis GG1-GG6, GE6, ZF1, and GK only. It does not name City Gen 6 (2014>) or City Hatchback GN5 — official technical-document coverage for those applications is UNRESOLVED in this evidence set (existing compatibility listing is unchanged).
Source: official_technical_document · 2026-09-02