H&R LAMBORGHINI HURACAN LP610-4 COUPE +SPYDER ONLY FOR ADAPTIVE + LIFT Sport Spring
SKU: 28689-2
Vehicle Make: Lamborghini
RM4,840
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- LAMBORGHINI · HURACAN LP610-4
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about 20 mm (depending on the vehicle version) by using different springs. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 11.5 mm / 11.75 mm / 11.75 mm / 12.5 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 5.0 / 6.1 / 7.5 / 6.9 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 170 mm / 195 mm / 225 mm / 219 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 98 mm / 94 mm / 97 mm / 107 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `H&R 28689-1 VA (F)` · `H&R 28689-1 HA (R)` · `H&R 28689-2 VA (F)` · `H&R 28689-2 HA (R)` |
| Approval documentation | Teilegutachten 182XT0113-02; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | TG) Lamborghini (I) 4026 724 Huracán CS) A) L) 950 / 1100 e3*KS07/46*0279* . . *) LP 610-4, Performante / 4WD CS) Coupé, Spyder (Kabrio-Limousine) A) mit adaptiver Dämpferregelung / with adaptive damping adjustment L) incl. Lamborghini Liftsystem (Achse 1) / incl. Lamborghini front axle lifting system kit TG) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EG) Nr. 2017/1347 with regard to Directive 2007/46/EC, as last amended by Regulation (EC) No.2017/1347 |
| Permissible axle loads, front/rear | 950 / 1100 kg |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 182XT0113-02: Lowering of the body up to about 20 mm (depending on the vehicle version) by using different springs.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 182XT0113-02), issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02