H&R M/BENZ CLA C118 4WD Sport Spring
SKU: 28684-5
Vehicle Make: M/benz
RM1,580
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- M/BENZ · C118
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ca. 30 mm *) (depending on the vehicle type and version) by using different springs. *) bei Fahrzeugen mit serienmäßiger Tieferlegung abweichend less lowering for vehicles with standard lowering |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 1-III / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) | 13.0 mm / 13.0 mm / 13.0 mm / 11.75 mm / 11.75 mm / 11.0 mm / 12.0 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 1-III / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) | 4.75 / 4.6 / 4.6 / 4.8 / 4.8 / 8 / 4.8 |
| Untensioned length (axle 1-I / axle 1-II / axle 1-III / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) | 262 mm / 277 mm / 288 mm / 219 mm / 230 mm / 306 mm / 225 mm |
| External diameter (axle 1-I / axle 1-II / axle 1-III / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) | 151 mm / 152 mm / 154 mm / 125 mm / 125 mm / 118 mm / 124 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28684- ** VA (F)` · `28684- ** HA (R)` · `28684-1 VA (F)` · `28684-2 VA (F)` · `28684-3 VA (F)` · `28684-1 HA (R)` |
| Approval documentation | Teilegutachten 182XT0175-05, 15.12.2020; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | Daimler (D) 1313 Mercedes-Benz (D) 2222 F2A A-Klasse A) H) K) S) 2WD / 4WD (4Matic) 1140 / 1010 e1*2007/46*1829* . . +) F2CLA CLA-Klasse A) H) K) S) Limousine / Saloon 2WD / 4WD (4Matic) 1135 / 1050 e1*2007/46*1912* . . +) CLA-Klasse H) K) Shooting Brake 2WD 1140 / 1060 A) incl. Fahrzeuge mit adaptiver Verstelldämpfung / incl. vehicles with adaptive damping H) Ausgenommen AMG- und Elektro- oder Hybrid-Modelle (PHEV / FHEV), Mild-Hybride sind zulässig exept AMG- and electro- or hybrid-models (PHEV / FHEV), mild-hybrids are permitted K) Komfortfahrwerk mit Tieferlegung / lowered comfort suspension S) Standard-Komfortfahrwerk ohne Tieferlegung / standard-comfort suspension without lowering +) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die VO (EU) Nr. 2017/1347 | 2018/1832 with regard to Directive 2007/46/EC, as last amended by Regulation (EU) No. 2017/1347 | 2018/183 |
| Permissible axle loads, front/rear | 1140 / 1010 kg; 1135 / 1050 kg; 1140 / 1060 kg |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 182XT0175-05: Lowering of the body up to about ca. 30 mm *) (depending on the vehicle type and version) by using different springs. *) bei Fahrzeugen mit serienmäßiger Tieferlegung abweichend less lowering for vehicles with standard lowering
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 182XT0175-05), dated 15.12.2020, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02