H&R M/BENZ W203 W209 Sport Spring
SKU: 29392-1
Vehicle Make: M/benz
RM1,550
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- M/BENZ · W203 W209
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Tieferlegung des Aufbaus bis zu ca. 40 mm (je nach Typ und Fahrzeugausführung) durch Verwendung anderer Federn. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1 / axle 2) | 14.5 mm / 14.0 mm |
| Total number of coils (axle 1 / axle 2) | 4.5 / 8.75 |
| Untensioned length (axle 1 / axle 2) | 285 mm / 310 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Approval documentation | Teilegutachten 02TG0273-08, 30.07.2008; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | DAIMLER- CHRYSLER (D) [0710, 0999] Daimler (D) [1313] 203 203 K 203 CL 209 C 160/180, C 180/200 Kompr., C 200/220 CDI, C 200 CGI, C 230, C 230 Kompr., C 240, C 270 CDI, C 280, C 320 /-CDI, C 350, C 30 CDI AMG, C 32 AMG, C 55 AMG, CLC 180/200 Kompressor, CLC 200/220CDI, CLC 230, CLC 350 CLK 200 Kompr., CLK 220 CDI, CLK 240, CLK 270 CDI, CLK 280, CLK 320 /-CDI, CLK 350, CLK 500, CLK 55 AMG 1100 / 1090 1100 / 1190 1100 / 1055 1100 / 1155 e1*98/14*0139* . . e1*98/14*0158* . . e1*98/14*0159* . . e1*98/14*0184* . . |
| Permissible axle loads, front/rear | 1100 / 1090 kg; 1100 / 1190 kg; 1100 / 1055 kg; 1100 / 1155 kg |
| Official note | Niveauregulierung nicht zulässig. |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 02TG0273-08: Tieferlegung des Aufbaus bis zu ca. 40 mm (je nach Typ und Fahrzeugausführung) durch Verwendung anderer Federn.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 02TG0273-08), dated 30.07.2008, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted; on vehicles with a load-dependent brake pressure controller, this is to be reset to the unladen level (per manufacturer instructions).
Source: official_technical_document · 2026-09-02