H&R M/BENZ W205 C43 Sport Spring
SKU: 28811-2
Vehicle Make: M/benz
RM1,570
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- M/BENZ · W205
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ca. 45 mm *) (depending on the vehicle version) by using special springs. *) Siehe IV.1.4.: Weitere Angaben zur Tieferlegung des Aufbaus / See IV.1.4.: Further information about lowering of the body |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1 / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) | 13.5 mm / 13.5 mm / 13.5 mm / 14.0 mm / 14.25 mm |
| Total number of coils (axle 1 / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) | 6.55 / 6.55 / 10.0 / 9.75 / 9.9 |
| Untensioned length (axle 1 / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) | 271 mm / 281 mm / 318 mm / 314 mm / 327 mm |
| External diameter (axle 1 / axle 2-I / axle 2-II / axle 2-III / axle 2-IV) | 115 mm / 115 mm / 105 mm / 106 mm / 106 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28811 ** VA (F)` · `28811 ** HA (R)` · `28811 VA (F)` · `28811 HA (R)` · `28811-3 HA (R)` |
| Approval documentation | Teilegutachten 142XT0076-16, 13.09.2023; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751 |
| Application range (as printed) | Daimler (D) 1313 Mercedes- Benz 2222 204 C-Klasse / C-class Limousine / sedan (W205), Coupé (C205), Cabrio / convertible (A205) 1155 / 1210 H1) e1*2001/116*0431*29 - . . 204 K C-Klasse / C-class “T-Modell” Kombi / station wagon (S205) 1140 / 1270 H2) e1*2001/116*0457*25 - . . V) C 160/180/200/220/250/300/400/450, incl. BlueTEC/CDI/d, 450 AMG/AMG C 43, 2WD + 4WD (4MATIC), incl. Mild-Hybride, incl. BlueEFFICIENCY Edition; C 300de/300e//350e (Plug-in-Hybride) + C300h (Mild-Hybrid) H1) Plug-In-Hybride, Achse 2 bis zu / axle 2 up to : 1365 kg H2) Plug-In-Hybride, Achse 2 bis zu / axle 2 up to : 1380 kg +) in Bezug auf die Richtlinie 70/156/EWG, zuletzt geändert durch die Richtlinie 2007/37/EG with regard to Directive 70/156/EEC, as last amended by Directive 2007/37/EC |
| Permissible axle loads, front/rear | 1155 / 1210 kg; 1140 / 1270 kg; 400 / 450 kg |
| Official note | Niveauregulierung oder Luftfahrwerk nicht zulässig. |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 142XT0076-16: Lowering of the body up to about ca. 45 mm *) (depending on the vehicle version) by using special springs. *) Siehe IV.1.4.: Weitere Angaben zur Tieferlegung des Aufbaus / See IV.1.4.: Further information about lowering of the body
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 142XT0076-16), dated 13.09.2023, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02