H&R M/BENZ W206 C180 C200 C300 2022> Sport Spring
SKU: 28603-1
Vehicle Make: M/benz
RM1,770
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- M/BENZ · W206
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to 40/45 mm *) (axle 1/2, depending on the vehicle variant/version) by using special springs. *) Plug-in-Hybride: bis zu 45/40 mm (Achse 1/2) / up to 45/40 mm (axle 1/2) |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 13.5 mm / 13.5 mm / 15.0 mm / 14.5 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 6.7 / 6.7 / 8.5 / 8.7 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 285 mm / 295 mm / 303 mm / 295 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 116 mm / 116 mm / 114 mm / 120 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28603-** VA (F)` · `28603-** HA (R)` · `28603-1 VA (F)` · `28603-2 VA (F)` · `28603-1 HA (R)` · `28603-2 HA (R)` |
| Approval documentation | Teilegutachten 212XT0131-02, 23.10.2023; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751 |
| Application range (as printed) | Mercedes- Benz / 2222 R2CW “W206” C-Klasse Limousine F) H) M) C-class sedan F) H) M) 2WD: 1145 / 1285 4WD: 1190 / 1285 e1*2018/858*00016* . . C300e / C300de / C400e (Plug-in-Hybride) K) 1180 / 1550 R2CS “S206” C-Klasse T-Modell F) H) M) T) C-class station wagon F) H) M) T) 2WD: 1135 / 1340 4WD: 1175 / 1340 e1*2018/858*00017* . . C300e / C300de (Plug-in-Hybride) K) 1180 / 1550 A) nicht mit adaptiver Verstelldämpfung (Code 459) / not with electronic damper control (Code 459) F) mit Agility Control Fahrwerk mit Tieferlegung (Code 677) oder Sportfahrwerk (Code 486) with Agility Control suspension and lowering (Code 677) or sport suspension (code 486) H) incl. Mild-Hybrid, nicht für Plug-in-Hybrid Versionen / incl. Mild-Hybrid, not for Plug-in-Hybrid versions K) mit Komfortfahrwerk (Code 485), 2WD + 4WD / with comfort suspension (code 485), 2WD + 4WD |
| Permissible axle loads, front/rear | 1145 / 1285 kg; 1190 / 1285 kg; 1180 / 1550 kg; 1135 / 1340 kg |
| Official note | Height reduction of the air suspension at axle 2: (C 300 e/de, C400 e, incl. 4MATIC) |
| Official note (2) | Absenkung des Höhenstandes der Luftfederung an Achse 2: (C 300 e/de, C400 e, incl. 4MATIC) |
| Official test result | "no negative effects on the operational safety and road- worthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 212XT0131-02: Lowering of the body up to 40/45 mm *) (axle 1/2, depending on the vehicle variant/version) by using special springs. *) Plug-in-Hybride: bis zu 45/40 mm (Achse 1/2) / up to 45/40 mm (axle 1/2)
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 212XT0131-02), dated 23.10.2023, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.
Source: official_technical_document · 2026-09-02