MYDriveHubs

H&R M/BENZ W206 C43 AMG 2022> Sport Spring

SKU: 28558-1

Vehicle Make: M/benz

RM2,070

Quantity

Shipping & returns

Dispatch time is confirmed via WhatsApp.

Compatibility

  • M/BENZ · W206 C43

Key Features

  • Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
  • Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
  • Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
  • Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
  • Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
  • 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
  • Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.

Specifications

Lowering (official) Lowering of the body up to 20/20 mm (axle 1/2, depending on the vehicle variant/version) by using special springs.
Spring type Stahl-Schraubendruckfedern (steel coil springs)
Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) 13.5 mm / 14.0 mm / 15.0 mm / 17.0 mm
Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) 4.9 / 4.8 / 5.6 / 6.6
Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) 267.0 mm / 247.0 mm / 273.0 mm / 265.0 mm
External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) 129.5 mm / 124.5 mm / 111.0 mm / 107.5 mm
Corrosion protection Powder coating (Kunststoffbeschichtung)
Bump stop, spring travel (max.) Standard
Coil markings `28558-** VA (F)` · `28558-** HA (R)` · `28558-1 VA (F)` · `28558-2 VA (F)` · `28558-1 HA (R)` · `28558-2 HA (R)`
Approval documentation Teilegutachten 232XT0085-01, 16.02.2024; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751
Application range (as printed) Mercedes- Benz / 2222 R2CW “W206” C-Klasse Limousine C-class saloon nur / only : AMG C 43 4MATIC+ C 63 S E PERFORMANCE 1150 / 1210 e1*2018/858*00016* . . R2CS “S206” C-Klasse T-Modell C-class station wagon nur / only : AMG C 43 4MATIC+ 1160 / 1265 e1*2018/858*00017* . . A) mit adaptiver Verstelldämpfung “AMG RIDE CONTROL” und Hinterachslenkung with electronic damper control “AMG RIDE CONTROL” and rear axle steering +) in Bezug auf die Verordnung (EU) 2018/858, zuletzt geändert durch die Verordnung (EU) Nr. 2021/1445 with regard to Regulation (EU) 2018/858, as last amended by Regulation (EU) No 2021/1445
Permissible axle loads, front/rear 1150 / 1210 kg; 1160 / 1265 kg
Official test result "no negative effects on the operational safety and road- worthiness of the vehicle were noticed."

Installation

Professional installation is recommended for this product.

Book an Appointment

Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.

FAQ

What is the official lowering of this H&R Sport Spring?

Per the Teilegutachten 232XT0085-01: Lowering of the body up to 20/20 mm (axle 1/2, depending on the vehicle variant/version) by using special springs.

Source: official_technical_document · 2026-09-02

What approval documentation does this spring carry?

Teilegutachten (Nr. 232XT0085-01), dated 16.02.2024, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.

Source: official_technical_document · 2026-09-02

What must be checked after installation?

Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.

Source: official_technical_document · 2026-09-02