H&R M/BENZ W213 4CYL 6CYL C238 ECOUPE Sport Spring
SKU: 28740-2
Vehicle Make: M/benz
RM1,790
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- M/BENZ · W213 C238
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ca. 40 mm *) (depending on the vehicle type and version) by using different springs and height reduction XX) of the air suspension at axle 2 (R1ES). *) bei Fahrzeugen mit AGILITY CONTROL Fahrwerk und Tieferlegung abweichend |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 13.75 mm / 13.75 mm / 14.0 mm / 14.25 mm / 14.0 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 8.7 / 8.7 / 9.75 / 10.0 / 9.75 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 346 mm / 357 mm / 306 mm / 325 mm / 310 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III) | 117 mm / 117 mm / 105 mm / 107 mm / 106 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28740- ** VA (F)` · `28740- ** HA (R)` · `28740-1 VA (F)` · `28740-2 VA (F)` · `28740-1 HA (R)` · `28740-2 HA (R)` |
| Approval documentation | Teilegutachten 162XT0164-11, 02.02.2021; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | Daimler (D) 1313 Mercedes- Benz (D) 2222 212 F) S) D) E-Klasse / E-class (‘W213’) Limousine / Sedan 1260 / 1340 H1) e1*2001/116*0501*24 - . . T1) R1EC F) S) D) E-Klasse / E-class - Coupé (‘C238’) - Cabriolet (‘A238’) 1275 / 1295 e1*2007/46*1666* . . T2) R1ES F) A) D) E-Klasse / E-class T-Modell (‘S213’) Kombi / Station wagon 1260 / 1500 H2) e1*2007/46*1560* . . T2) R1ECLS F) S) D) CLS-Klasse / CLS-class (‘C257’) Limousine / Sedan 1245 / 1340 e1*2007/46*1818* . . T2) H1) Plug-In Hybrid Versionen – zul. Hinterachslast: 1500 kg / Plug-In Hybrid versions – perm. rear axle load: 1500 kg H2) Plug-In Hybrid Versionen – zul. Hinterachslast: 1600 kg / Plug-In Hybrid versions – perm. rear axle load: 1600 kg F) 2WD und 4WD (4MATIC) Versionen, mit AGILITY CONTROL - / Komfort - Fahrwerk mit / ohne Tieferlegung 2WD and 4WD (4MATIC) versions, with AGILITY CONTROL - / comfort - suspension with / wit |
| Permissible axle loads, front/rear | 1260 / 1340 kg; 1275 / 1295 kg; 1260 / 1500 kg; 1245 / 1340 kg |
| Official note | Vehicles with level control shall not be retrofitted in the way described above. |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 162XT0164-11: Lowering of the body up to about ca. 40 mm *) (depending on the vehicle type and version) by using different springs and height reduction XX) of the air suspension at axle 2 (R1ES). *) bei Fahrzeugen mit AGILITY CONTROL Fahrwerk und Tieferlegung abweichend
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 162XT0164-11), dated 02.02.2021, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02