H&R MINI 2024> 2 + 4 DOOR COOPER S + C Sport Spring
SKU: 28533-1
Vehicle Make: MINI
RM1,900
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- MINI · F66 F65
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to 35/15 mm (axle 1/2, depending on the vehicle variant/version) by using special springs. *) Cooper C: bis zu 30/15 mm (Achse 1/2) / up to 30/15 mm (axle 1/2) |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1 / axle 2) | 12.5 mm / 11.5 mm |
| Total number of coils (axle 1 / axle 2) | 4.3 / 5.75 |
| Untensioned length (axle 1 / axle 2) | 221.0 mm / 223.0 mm |
| External diameter (axle 1 / axle 2) | 146.0 mm / 107.0 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28533-** VA (F)` · `28533-** HA (R)` · `28533-1 VA (F)` · `28533-1 HA (R)` |
| Approval documentation | Teilegutachten 242XT0077-00, 16.07.2024; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751 |
| Application range (as printed) | BAYER.- MOT.WERKE - BMW / 0005 FM6 Mini (F66) Cooper C / Cooper S 2WD 1005 / 815 e1*2018/858*00373* . . A) auch für Fahrzeuge mit adaptiver Dämpferregelung / also for vehicles with adaptive dampers +) in Bezug auf die die Verordnung (EU) Nr. 2018/858 , zuletzt geändert durch die Verordnung (EU) 2022/2236 / with regard to Regulation (EU) No. 2018/858, as last amended by Regulation (EU) 2022/2236 |
| Permissible axle loads, front/rear | 1005 / 815 kg |
| Official test result | "no negative effects on the operational safety and road- worthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 242XT0077-00: Lowering of the body up to 35/15 mm (axle 1/2, depending on the vehicle variant/version) by using special springs. *) Cooper C: bis zu 30/15 mm (Achse 1/2) / up to 30/15 mm (axle 1/2)
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 242XT0077-00), dated 16.07.2024, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.
Source: official_technical_document · 2026-09-02