H&R MINI 2002-2006 Sport Spring
SKU: 29343-2
Vehicle Make: MINI
RM1,270
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- MINI · R50 R52 R53
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Tieferlegung des Aufbaus bis zu ca. 30 mm (je nach Fahrzeugausführung) durch Verwendung anderer Federn. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1 / axle 2) | 13.0 mm / 10.25 mm |
| Total number of coils (axle 1 / axle 2) | 4.15 / 7.8 |
| Untensioned length (axle 1 / axle 2) | 235 mm / 240 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Approval documentation | Teilegutachten 12TG0963-05, 20.04.05; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | Bayer.Mot.Werke- BMW [0005] R50, Mini Mini, Mini One, Mini One D, Mini Cooper, Mini Cooper S (incl. Cabrio) 890 / 800 e1*98/14*0168* . . e1*2001/116*0231* . . |
| Permissible axle loads, front/rear | 890 / 800 kg |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 12TG0963-05: Tieferlegung des Aufbaus bis zu ca. 30 mm (je nach Fahrzeugausführung) durch Verwendung anderer Federn.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 12TG0963-05), dated 20.04.05, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted; on vehicles with a load-dependent brake pressure controller, this is to be reset to the unladen level (per manufacturer instructions).
Source: official_technical_document · 2026-09-02