H&R NISSAN T32 X-TRAIL 2014> Sport Spring
SKU: 28814-4
Vehicle Make: Nissan
RM1,860
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- NISSAN · X-TRAIL
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about 35 mm (depending on the vehicle type and version) by using different springs. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 14.0 mm / 14.0 mm / 12.0 mm / 15.0 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 6.0 / 6.0 / 8.95 / 7.5 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 295 mm / 306 mm / 303 mm / 288 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 158 mm / 158 mm / 115 mm / 142 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `H&R 28814 VA (F)` · `H&R 28814 HA (R)` |
| Approval documentation | Teilegutachten 142XT0050-03, 2016-06-01; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | Nissan (CH) [1329] Renault (F) [3333] J11 T32 RFE Nissan Qashqai - 2WD - 4WD Nissan X-Trail - 2WD Kadjar - 2WD 1110 / 970 1110 / 1005 1135 / 1090 1090 / 1015 e11*2007/46*0963*..*) e13*2007/46*1456*..**) e2*2007/46*0475*..**) *) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EU) Nr. 2015/45 with regard to Directive 2007/46/EC, as last amended by Regulation (EU) No. 2015/45 **) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EU) Nr. 2015/166 with regard to Directive 2007/46/EC, as last amended by Regulation (EU) No. 2015/166 |
| Permissible axle loads, front/rear | 1110 / 970 kg; 1110 / 1005 kg; 1135 / 1090 kg; 1090 / 1015 kg |
| Official note | Vehicles with level control shall not be retrofitted in the way described above. |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 142XT0050-03: Lowering of the body up to about 35 mm (depending on the vehicle type and version) by using different springs.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 142XT0050-03), dated 2016-06-01, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted; on vehicles with a load-dependent brake pressure controller, this is to be reset to the unladen level (per manufacturer instructions).
Source: official_technical_document · 2026-09-02