H&R PEUGEOT 308, 308 GT YEAR2013> Sport Spring
SKU: 28820-2
Vehicle Make: Peugeot
RM1,430
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- PEUGEOT · 308
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about 30 mm*) (depending on the vehicle version) by using different springs. *) 308 SW, 308 SW GT: ca. 35 mm |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 12.75 mm / 12.75 mm / 10.75 mm / 11.5 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 5.5 / 5.5 / 8.95 / 8.5 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 346 mm / 336 mm / 375 mm / 372 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 157 mm / 157 mm / 125 mm / 130 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `H&R 28820 VA (F)` · `H&R 28820 HA (R)` |
| Approval documentation | Teilegutachten 132XT0225-03, 2015-07-23; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | Peugeot (F) [3003] L 308, 308 GT 308 SW, 308 SW GT (station wagon / Kombi ) 1070 / 900 1100 / 980 e2*2007/46*0405* . . *) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EG) 166/2015 with regard to Directive 2007/46/EC, as last amended by Regulation (EC) 166/2015 |
| Permissible axle loads, front/rear | 1070 / 900 kg; 1100 / 980 kg |
| Official note | Vehicles with level control shall not be retrofitted in the way described above. |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 132XT0225-03: Lowering of the body up to about 30 mm*) (depending on the vehicle version) by using different springs. *) 308 SW, 308 SW GT: ca. 35 mm
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 132XT0225-03), dated 2015-07-23, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted; on vehicles with a load-dependent brake pressure controller, this is to be reset to the unladen level (per manufacturer instructions).
Source: official_technical_document · 2026-09-02