H&R PORSCHE 992 C2S + C4S 2019> FOR PASM SPORT SUSPENSION Sport Spring
SKU: 28652-1
Vehicle Make: Porsche
RM2,630
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- PORSCHE · 992
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ca. 30 mm*) (depending on the vehicle version) by using special springs in conjunction with the standard struts / shock absorbers with slot adjustment on axle 2. *) bei Fahrzeugen mit serienmäßiger Tieferlegung abweichend l |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 9.75 mm / 9.75 mm / 13.5 mm / 12.25 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 7.0 / 8.1 / 8.0 / 7.7 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 227.0 mm / 263.0 mm / 247.0 mm / 255.0 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 106.0 mm / 106.0 mm / 125.0 mm / 113.0 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28652- ** VA (F)` · `28652- ** HA (R)` · `28652-1 VA (F)` · `28652-2 VA (F)` · `28652-1 HA (R)` · `28652-2 HA (R)` |
| Approval documentation | Teilegutachten 192XT0143-04, 13.09.2022; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751 |
| Application range (as printed) | Porsche / 0583 992 911 Carrera S / 4S PS) Carrera incl. S / 4 / 4S P) Carrera GTS / 4 GTS P) Targa 4 / 4S P) 875 / 1330 e13*2007/46*0992* . . L) auch für Fahrzeuge mit Liftsystem an Achse 1 / also for vehicles with lift system on axle 1 P) mit Standardfahrwerk, PASM Standardfahrwerk / with standard suspension, PASM standard suspension PS) mit PASM Sportfahrwerk / with PASM sport suspension (PASM = Porsche Active Suspension Managment) V) Cabriolet/Convertible, Coupè, Targa; 2WD + 4WD; nicht für die Ausführungen / not for versions : GT3, Turbo, Turbo S +) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EU) Nr. 2019/543 with regard to Directive 2007/46/EC, as last amended by Regulation (EU) No. 2019/543 |
| Permissible axle loads, front/rear | 875 / 1330 kg |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 192XT0143-04: Lowering of the body up to about ca. 30 mm*) (depending on the vehicle version) by using special springs in conjunction with the standard struts / shock absorbers with slot adjustment on axle 2. *) bei Fahrzeugen mit serienmäßiger Tieferlegung abweichend l
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 192XT0143-04), dated 13.09.2022, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02