H&R PORSCHE MACAN WITH PASM ONLY Sport Spring
SKU: 28788-1
Vehicle Make: Porsche
RM2,360
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- PORSCHE · MACAN
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ²) ( depending on the vehicle version) by using special springs. ²) mit/with PASM P) : 40 mm, ohne/without PASM P) : 30 mm; Macan GTS S) : 25 mm S) PASM P) serienmäßig/standard P) PASM = Porsche Active Suspens |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2) | 16.0 mm / 16.0 mm / 13.0 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2) | 5.0 / 7.0 / 9.5 |
| Untensioned length (axle 1-I / axle 1-II / axle 2) | 298 mm / 287 mm / 322 mm |
| External diameter (axle 1-I / axle 1-II / axle 2) | 160 mm / 145 mm / 120 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `H&R 28788 VA (F)` · `H&R 28788 HA (R)` |
| Approval documentation | Teilegutachten 142XT0226-03, 07.03.2023; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751 |
| Application range (as printed) | Porsche 0583 95B Macan, incl. S, S Diesel, T, Turbo, GTS 1290 / 1360 e13*2007/46*1165* . . *) s. IV.3.4. **) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EU) Nr. 2019/543 with regard to Directive 2007/46/EC, as last amended by Regulation (EU) No. 2019/543 |
| Permissible axle loads, front/rear | 1290 / 1360 kg |
| Official note | Vehicles with level control shall not be retrofitted in the way described above. |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 142XT0226-03: Lowering of the body up to about ²) ( depending on the vehicle version) by using special springs. ²) mit/with PASM P) : 40 mm, ohne/without PASM P) : 30 mm; Macan GTS S) : 25 mm S) PASM P) serienmäßig/standard P) PASM = Porsche Active Suspens
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 142XT0226-03), dated 07.03.2023, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02