H&R SUBARU SUBARU BRZ Sport Spring
SKU: 28856-1
Vehicle Make: Subaru
RM1,690
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- SUBARU · BRZ
- TOYOTA · GT86
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Up to about 25 mm (depending on the vehicle type and version) |
| Spring type | Steel coil springs (Stahl-Schraubendruckfedern) |
| Wire diameter (axle 1 / axle 2) | 11.0 mm / 11.5 mm |
| Total number of coils (axle 1 / axle 2) | 5.2 / 8.25 |
| Untensioned length (axle 1 / axle 2) | 230 mm / 256 mm |
| External diameter (axle 1 / axle 2) | 122 mm / 112 mm |
| Corrosion protection | Powder coating |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | Axle 1: `H&R 28856 VA (F)` · Axle 2: `H&R 28856 HA (R)` |
| Approval documentation | TÜV Rheinland Teilegutachten (Expert Opinion) Nr. 122XT0230-03, 2016-10-21 (replaces Nr. 122XT0230-02); basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | Toyota GT86 (ZN ZC GC/GF), Subaru BRZ (Fuji Heavy Ind. (J) [7106]) — incl. Facelift 2016 (Model 2017) |
| Permissible axle loads, front/rear | 876 / 943 kg (all listed variants) |
| Official test result | "Under operating conditions as are usual in traffic, no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the TÜV Rheinland Teilegutachten 122XT0230-03: lowering of the body up to about 25 mm, depending on the vehicle type and version.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
TÜV Rheinland Teilegutachten (Expert Opinion) Nr. 122XT0230-03, dated 2016-10-21, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: the headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted; on vehicles with a load-dependent brake pressure controller, this is to be reset to the unladen level (per manufacturer instructions).
Source: official_technical_document · 2026-09-02