H&R TESLA TESLA MODEL 3 2WD + 4WD Sport Spring
SKU: 28659-1
Vehicle Make: Tesla
RM2,040
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- TESLA · MODEL 3
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ca. 45 mm *) (depending on the vehicle version) by using different springs. *) 4WD Versionen: bis zu 30 mm / 4WD versions: up to about 30 mm Versionen mit adaptiver Dämpfung: bis zu 25 mm / versions adjustable dampers: up to |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2) | 14.5 mm / 14.0 mm / 16.5 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2) | 7.0 / 7.0 / 5.0 |
| Untensioned length (axle 1-I / axle 1-II / axle 2) | 319 mm / 319 mm / 297 mm |
| External diameter (axle 1-I / axle 1-II / axle 2) | 131 mm / 129 mm / 151 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28659-1 VA (F)` · `28659-1 HA (R)` · `28659-2 VA (F)` |
| Approval documentation | Teilegutachten 192XT0063-04, 02.09.2024; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751 |
| Application range (as printed) | Tesla (USA) 1480 003 Model 3 A) 2WD + 4WD incl. Standard Range, Standard Range Plus, Mid Range, Long Range, Performance; incl. Facelift 2023 (“Highland”) 1110 / 1260 e4*2007/46*1293* . . A) auch für Fahrzeuge mit elektronischer Dämpferverstellung also for vehicles with eletronic adjustable dampers +) in Bezug auf die Richtlinie 2007/46/EG, in der aktuellsten Fassung with regard to Directive 2007/46/EC, as last amended |
| Permissible axle loads, front/rear | 1110 / 1260 kg |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 192XT0063-04: Lowering of the body up to about ca. 45 mm *) (depending on the vehicle version) by using different springs. *) 4WD Versionen: bis zu 30 mm / 4WD versions: up to about 30 mm Versionen mit adaptiver Dämpfung: bis zu 25 mm / versions adjustable dampers: up to
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 192XT0063-04), dated 02.09.2024, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.
Source: official_technical_document · 2026-09-02