H&R TESLA TESLA MODEL Y 2WD + 4WD LONG RANGE + PERFORMANCE 2020> Sport Spring
SKU: 28605-1
Vehicle Make: Tesla
RM2,130
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- TESLA · MODEL Y
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to 40/50 mm *) (axle 1/2, depending on the vehicle variant / version) by using special springs. *) 2WD: bis zu 40 mm (Achse 1/2), Fahrzeugtyp 005: bis zu 35/40 mm (Achse 1/2) up to 40 mm (axle 1/2), Vehicle type 005: up to 40 mm (a |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1 / axle 2-I / axle 2-II) | 15.0 mm / 14.5 mm / 17.5 mm |
| Total number of coils (axle 1 / axle 2-I / axle 2-II) | 7.0 / 7.0 / 5.0 |
| Untensioned length (axle 1 / axle 2-I / axle 2-II) | 308.0 mm / 319.0 mm / 283.0 mm |
| External diameter (axle 1 / axle 2-I / axle 2-II) | 130.0 mm / 131.0 mm / 151.0 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28605-** VA (F)` · `28659-** VA (F)` · `28605-** HA (R)` · `28605-1 VA (F)` · `28659-1 VA (F)` · `28605-1 HA (R)` |
| Approval documentation | Teilegutachten 212XT0120-02, 10.11.2023; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | v / h) in kg (front / rear) in kg Tesla (USA) / 1480 003 Model Y 2WD / 4WD e4*2007/46*1293*19 - . . +) 1363 / 1500 005 e4*2018/858*00135* . . ++) +) in Bezug auf die aktuelle Fassung der Richtlinie 2007/46/EG. with regard to Directive 2007/46/EC as last amended. ++) in Bezug auf die Verordnung (EU) 2018/858 / with regard to Regulation (EU) 2018/858 |
| Permissible axle loads, front/rear | 1363 / 1500 kg |
| Official test result | "no negative effects on the operational safety and road- worthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 212XT0120-02: Lowering of the body up to 40/50 mm *) (axle 1/2, depending on the vehicle variant / version) by using special springs. *) 2WD: bis zu 40 mm (Achse 1/2), Fahrzeugtyp 005: bis zu 35/40 mm (Achse 1/2) up to 40 mm (axle 1/2), Vehicle type 005: up to 40 mm (a
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 212XT0120-02), dated 10.11.2023, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.
Source: official_technical_document · 2026-09-02