H&R TOYOTA HARRIER XU60 2014-2020 Sport Spring
SKU: 29123-1
Vehicle Make: Toyota
RM1,920
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- TOYOTA · HARRIER ZSU60
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about 40 mm (depending on the vehicle version) by using different springs. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2) | 14.5 mm / 15.0 mm / 14.5 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2) | 4.5 / 4.5 / 8.0 |
| Untensioned length (axle 1-I / axle 1-II / axle 2) | 280 mm / 275 mm / 280 mm |
| External diameter (axle 1-I / axle 1-II / axle 2) | 171 mm / 173 mm / 129 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `H&R 29123 VA (F)` · `H&R 29123 HA (R)` |
| Approval documentation | Teilegutachten 62XT0132-03, 2016-10-04; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | T) TOYOTA MEM (B) 5048 , Toyota Europe (B) [5013] XA3(a) Toyota RAV4 (2WD, 4WD) 1150 / 1150 e6*2001/116*0105*00 – 08 *) e6*2001/116*0105*09 .. **) *) bis/up to Modelljahr/model year 2012 H) nicht für/not for 2,5 Hybrid **) ab/from Modelljahr/model year 2013, incl. Facelift 2016 T) in Bezug auf die Richtlinie 70/156/EWG, zuletzt geändert durch die Richtlinie 2007/37/EG with regard to Directive 70/156/EEC, as last amended by Directive 2007/37/EC |
| Permissible axle loads, front/rear | 1150 / 1150 kg |
| Official note | Vehicles with level control shall not be retrofitted in the way described above. |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 62XT0132-03: Lowering of the body up to about 40 mm (depending on the vehicle version) by using different springs.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 62XT0132-03), dated 2016-10-04, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.
Source: official_technical_document · 2026-09-02