H&R VOLVO S60 MK3 T8 Twin Engine 2019> Sport Spring
SKU: 28665-2
Vehicle Make: Volvo
RM1,750
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- VOLVO · S60 MK3
- VOLVO · V60 V90
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ca. 35/25 mm (axle 1/axle 2; depending on the vehicle version) by using different springs at the front axle and using different spacer blocks beneath the sideward seat area of the composite leaf spring at the rear axle. I |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1 / axle 2) | 14.25 mm / 14.25 mm |
| Total number of coils (axle 1 / axle 2) | 7.25 / 7.25 |
| Untensioned length (axle 1 / axle 2) | 280 mm / 288 mm |
| External diameter (axle 1 / axle 2) | 125.5 mm / 125.7 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28665-2 VA (F)` · `H&R 28665-1 VA (F)` |
| Approval documentation | Teilegutachten 192XT0029-01; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | TG) Volvo (S) 9101 Z P V60 NA) NS) V) V90 NA) NS) V) 1210 / 1240 1210 / 1250 e4*2007/46*1315* .. e4*2007/46*1067* .. 2,4) 2WD / 4WD (AWD) NA) nicht für Fahrzeuge mit adaptivem Fahrwerk/Luftfahrwerk not for vehicles with adaptive suspension/air suspension NS) nicht für Fahrzeuge mit Sportfahrwerk / not for vehicles with sport suspension V) nicht für Ausführung/not for version : Twin Engine (Plug-in Hybrid), Cross Country TG) in Bezug auf die Richtlinie 2007/46/EG, letzte Fassung with regard to Directive 2007/46/EC, as last amended |
| Permissible axle loads, front/rear | 1210 / 1240 kg; 1210 / 1250 kg |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 192XT0029-01: Lowering of the body up to about ca. 35/25 mm (axle 1/axle 2; depending on the vehicle version) by using different springs at the front axle and using different spacer blocks beneath the sideward seat area of the composite leaf spring at the rear axle. I
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 192XT0029-01), issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02