MYDriveHubs
← Back

H&R VW ARTEON 4WD 2018> Sport Spring

SKU: 28784-13

Vehicle Make: VW

RM1,670

Quantity

Shipping & returns

Dispatch time is confirmed via WhatsApp.

Compatibility

  • VW · ARTEON

Key Features

  • Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
  • Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
  • Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
  • Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
  • Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
  • 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
  • Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.

Specifications

Lowering (official) Lowering of the body up to about 35 mm *) (depending on the vehicle type and version) by using different springs. *) bis zu 10 mm weniger bei Fahrzeugen mit adaptiver Fahrwerksregelung (DCC) up to 10 mm less lowering for vehicles with dynamic chassis co
Spring type Stahl-Schraubendruckfedern (steel coil springs)
Corrosion protection Powder coating (Kunststoffbeschichtung)
Bump stop, spring travel (max.) Standard
Coil markings `28784 VA (F)` · `28784 HA (R)`
Approval documentation Teilegutachten 152XT0007-13, 22.08.2023; basis: VdTÜV-Merkblatt Nr. 751
Application range (as printed) Volkswagen- VW 0603 3C Passat (B8) 2) Limousine / Sedan 1110 / 1170 e1*2001/116*0307*37 - . .+) Passat Variant (B8) A) O) Kombi / Station wagon 1160 / 1250 3H Arteon incl. R A) M) Limousine / Sedan 1150 / 1150 (2WD) 1200 / 1210 (4WD) e1*2007/46*1725* . . ++) Arteon incl. R A) M) “Shooting Brake“ Kombi / Station wagon 1160 / 1220 Skoda (CZ) [8004] 3T Superb (3V) 2) Limousine / Sedan 1110 / 1080 e11*2001/116*0326*32 - . .+) e8*2007/46*0317* . . ++) Superb Combi (3V) A) O) Kombi / Station wagon 1160 / 1200 2) 2WD A) 2WD + 4WD M) 2,0 TDI/TSI O) ohne Schlechtwegefahrwerk / without bad road suspension H) nicht für Plug-in-Hybrid Ausführungen / not for Plug-in-Hybrid versions R) auch für Fahrzeuge mit Sportfahrwerk (z.B. R-Line) / also for vehicles with sport suspension (e.g. R-Line) X) auch mit elektronischer Stoßdämpferregelung / also with electronic adjustable dampers +) in Bezug auf die R
Permissible axle loads, front/rear 1110 / 1170 kg; 1160 / 1250 kg; 1150 / 1150 kg; 1200 / 1210 kg
Official note Vehicles with level control shall not be retrofitted in the way described above.
Official test result "no negative effects on the operational safety and roadworthiness of the vehicle were noticed."

Installation

Professional installation is recommended for this product.

Book an Appointment

Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.

FAQ

What is the official lowering of this H&R Sport Spring?

Per the Teilegutachten 152XT0007-13: Lowering of the body up to about 35 mm *) (depending on the vehicle type and version) by using different springs. *) bis zu 10 mm weniger bei Fahrzeugen mit adaptiver Fahrwerksregelung (DCC) up to 10 mm less lowering for vehicles with dynamic chassis co

Source: official_technical_document · 2026-09-02

What approval documentation does this spring carry?

Teilegutachten (Nr. 152XT0007-13), dated 22.08.2023, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.

Source: official_technical_document · 2026-09-02

What must be checked after installation?

Per the Teilegutachten: headlamp setting is to be checked.

Source: official_technical_document · 2026-09-02