H&R VW MK7 R Sport Spring
SKU: 28816-1
Vehicle Make: VW
RM1,790
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- VW · GOLF
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about 25 mm (depending on the vehicle type and version) by using special springs. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 13.0 mm / 12.0 mm / 11.5 mm / 12.0 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 5.6 / 5.7 / 9.75 / 9.9 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 240 mm / 256 mm / 305 mm / 299 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 149 mm / 141 mm / 107 mm / 107 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Achse 1/Axle 1: geändert/modified (H&R 28880 VA-Z) |
| Coil markings | `H&R 28816 VA (F)` · `H&R 28816 HA (R)` · `H&R 28840 VA (F)` · `H&R 28816-2 VA (F)` |
| Approval documentation | Teilegutachten 142XT0004-08, 04.10.2021; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | Volkswagen- VW 0603 Seat (E) [7593] AU AUV 5F Golf R Golf R Variant Leon Sportstourer (ST) Cupra 1080 / 990 1070 / 1100 1050 / 1090 e1*2007/46*0623* . . e1*2007/46*0627* . . e9*2007/46*0094* . . 4) mit/ohne adaptiver Fahrwerksregelung / with/without DCC ; 4WD +) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die VO (EU) Nr. 2015/166 // 2018/1832 with regard to Directive 2007/46/EC, as last amended by Regulation (EC) No.2015/166 // 2018/1832 |
| Permissible axle loads, front/rear | 1080 / 990 kg; 1070 / 1100 kg; 1050 / 1090 kg |
| Official note | Vehicles with level control shall not be retrofitted in the way described above. |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 142XT0004-08: Lowering of the body up to about 25 mm (depending on the vehicle type and version) by using special springs.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 142XT0004-08), dated 04.10.2021, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02