MYDriveHubs
← Back

H&R VW MK8 GTI 2021> MULTI LINK REAR Sport Spring

SKU: 28639-8

Vehicle Make: VW

RM1,870

Quantity

Shipping & returns

Dispatch time is confirmed via WhatsApp.

Compatibility

  • VW · GOLF

Key Features

  • Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
  • Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
  • Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
  • Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
  • Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
  • 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
  • Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.

Specifications

Lowering (official) Lowering of the body up to about ca. 60 mm *) (depending on the vehicle version) by using special springs. *) Siehe IV.1.5.: Weitere Angaben zur Tieferlegung des Aufbaus / See IV.1.5.: Further information about lowering of the body
Spring type Stahl-Schraubendruckfedern (steel coil springs)
Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III / axle 2-IV / axle 2-V) 12.0 mm / 12.0 mm / 11.25 mm / 11.0 mm / 12.0 mm / 11.25 mm / 13.0 mm
Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III / axle 2-IV / axle 2-V) 5.6 / 5.6 / 9.25 / 9.7 / 9.25 / 9.2 / 8.9
Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III / axle 2-IV / axle 2-V) 255 mm / 262 mm / 315 mm / 325 mm / 310 mm / 293 mm / 311.0 mm
External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II / axle 2-III / axle 2-IV / axle 2-V) 142 mm / 140.5 mm / 106 mm / 114 mm / 109 mm / 106 mm / 118.0 mm
Corrosion protection Powder coating (Kunststoffbeschichtung)
Bump stop, spring travel (max.) Standard
Coil markings `28639- ** VA (F)` · `28639- ** HA (R)` · `H&R 28639-1 VA (F)` · `28639-1 HA (R)` · `28639-2 VA (F)` · `28639-2 HA (R)`
Approval documentation Teilegutachten 202XT0007-16, 27.11.2024; basis: VdTÜV-Merkblatt Fahrzeug und Mobilität 751
Application range (as printed) Volkswagen- VW / 0603 CD Golf (Golf 8) incl. GTD, GTI, GTI Clubsport, GTE, 1.4 eHybrid (plug-in-hybrid) 1080 / 940 H1) e1*2007/46*2014* . . +) CDV Golf V) (Golf 8 Variant) 1070 / 1040 e1*2007/46*2180* . . +) Audi / 0588 GY A3 (8Y) M) Limousine + Sportback incl. 40 / 45 TFSI e (plug-in-hybrid) 1090 / 975 H4) e1*2007/46*2060* . . +) Skoda (CZ) / 8004 NX Octavia incl. Combi, incl. RS, incl. 1,4 TSI iV (plug-in-hybrid) 1080 / 1110 H2) e8*2007/46*0355* . . +) Seat (E) / 7593 KL Cupra / Seat Leon, incl. VZ, incl. FR, auch als / also as 1.4 e-Hybrid (plug-in-hybrid) 1100 / 950 H3) e9*2007/46*3167* . . ++) Cupra / Seat Leon Sportstourer, incl. FR, auch als / also as 1.4 e-Hybrid (plug-in-hybrid), incl. VZ 1090 / 1050 H3) e9*2007/46*3167* . . ++) A) auch mit adaptiver Fahrwerksregelung (DCC) / also with adaptive dampers (DCC) D) nur 2WD-Ausführungen, siehe Anlage K / only 2WD-versions, see append
Official test result "no negative effects on the operational safety and roadworthiness of the vehicle were noticed."

Installation

Professional installation is recommended for this product.

Book an Appointment

Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.

FAQ

What is the official lowering of this H&R Sport Spring?

Per the Teilegutachten 202XT0007-16: Lowering of the body up to about ca. 60 mm *) (depending on the vehicle version) by using special springs. *) Siehe IV.1.5.: Weitere Angaben zur Tieferlegung des Aufbaus / See IV.1.5.: Further information about lowering of the body

Source: official_technical_document · 2026-09-02

What approval documentation does this spring carry?

Teilegutachten (Nr. 202XT0007-16), dated 27.11.2024, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.

Source: official_technical_document · 2026-09-02

What must be checked after installation?

Per the Teilegutachten: headlamp setting is to be checked; suspension alignment is to be taken after the vehicle is retrofitted.

Source: official_technical_document · 2026-09-02