H&R VW MK8 TSI 2021> MULTI LINK REAR Sport Spring
SKU: 28637-2
Vehicle Make: VW
RM1,630
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Compatibility
- VW · GOLF
Key Features
- Sporty look & performance: H&R lowering springs are the ideal solution for anyone who wants to optimize the handling of their car and achieve a sporty look while retaining the standard ride comfort, through the exact set-up of the springs to the original shock absorbers.
- Developed & manufactured in Germany, with ABE (only valid in Germany) or part approval.
- Discreet lowering of the vehicle's centre of gravity in conjunction with the standard suspension.
- Vehicle variants with electronically controlled shock absorbers or so-called active suspensions keep their functions fully intact.
- Made of hardened and tempered spring steel with weather-resistant surface protection by zinc phosphating & powder coating, mostly in the colour "H&R Blue".
- 100% Made in Germany – 100% Made in the Sauerland, manufactured at the H&R headquarters in Lennestadt.
- Quality management system certified according to ISO 9001:2015, fulfilling the approval-relevant requirements of the Federal Motor Transport Authority (KBA) for type/part approvals under German road traffic law.
Specifications
| Lowering (official) | Lowering of the body up to about ca. 30 mm (depending on the vehicle version) by using different springs. |
| Spring type | Stahl-Schraubendruckfedern (steel coil springs) |
| Wire diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 12.5 mm / 12.5 mm / 11.5 mm / 11.0 mm |
| Total number of coils (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 4.6 / 4.6 / 8.2 / 9.7 |
| Untensioned length (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 250 mm / 250 mm / 315 mm / 330 mm |
| External diameter (axle 1-I / axle 1-II / axle 2-I / axle 2-II) | 148 mm / 143 mm / 118 mm / 114 mm |
| Corrosion protection | Powder coating (Kunststoffbeschichtung) |
| Bump stop, spring travel (max.) | Standard |
| Coil markings | `28637-2 VA (F)` · `28637-1 HA (R)` · `28637-3 VA (F)` · `28637-2 HA (R)` |
| Approval documentation | Teilegutachten 202XT0024-01, 21.04.2020; basis: VdTÜV-Merkblatt Nr. 751 |
| Application range (as printed) | TG) Volkswagen-VW 0603 CD Golf (‘Golf VIII’) 1080 / 940 e1*2007/46*2014* .. *) 2WD, Vierlenkerhinterachse / Four-link rear axle , Verbundlenkerhinterachse / Twist-beam rear axle A) inkl. adaptiver Fahrwerksregelung (DCC) / also with adaptive dampers (DCC) R) auch für Fahrzeuge mit R-Line Sportpaket / also for vehicles with R-Line sport package S) nicht für Fahrzeuge mit Schlechtwegefahrwerk/not for vehicles with bad road suspension TG) in Bezug auf die Richtlinie 2007/46/EG, zuletzt geändert durch die Verordnung (EU) Nr. 2018/1832 with regard to Directive 2007/46/EC, as last amended by Regulation (EU) No. 2018/1832 |
| Permissible axle loads, front/rear | 1080 / 940 kg |
| Official test result | "no negative effects on the operational safety and roadworthiness of the vehicle were noticed." |
Installation
Professional installation is recommended for this product.
Book an AppointmentInstallation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What is the official lowering of this H&R Sport Spring?
Per the Teilegutachten 202XT0024-01: Lowering of the body up to about ca. 30 mm (depending on the vehicle version) by using different springs.
Source: official_technical_document · 2026-09-02
What approval documentation does this spring carry?
Teilegutachten (Nr. 202XT0024-01), dated 21.04.2020, issued under StVZO §19(3) Nr. 4 — the standard German acceptance-of-modification (Änderungsabnahme) process applies after installation.
Source: official_technical_document · 2026-09-02
What must be checked after installation?
Per the Teilegutachten: headlamp setting is to be checked.
Source: official_technical_document · 2026-09-02