Overview
MOTUL 300V COMPETITION 5W-40 is a racing motor oil for all racing gasoline or Diesel engines — naturally aspirated, turbocharged or supercharged, with direct/indirect injection or carburetted — built for tuned engines and high-performance cars operating over a wide rpm and temperature range in severe driving conditions. Formulated with proprietary ESTER Core® Technology and compatible with all fuel types including biofuels up to E85.
Compatibility
Compatibility information not available.
Key Features
- ESTER Core® Technology — proprietary synthetic ester base for maximum power output via friction reduction at all rpm
- High shear stability for maximal oil film resistance and reduced engine wear
- Increased oxidation resistance for longer engine and oil life
- Maximal polar adherence for rapid engine rpm response and improved driveability
- Fast oil pressure build-up and optimal oil flow at cold start
- Low oil volatility/evaporation to help control oil consumption
- High detergency for engine cleanliness; compatible with particulate filters, LSPI protection
- Compatible with biofuels, especially Ethanol, up to E85
Applications
- Racing/competition gasoline and Diesel engines — naturally aspirated, turbocharged or supercharged, direct/indirect injection or carburetted
- Tuned engines and high-performance cars operating over a wide rpm and temperature range in severe driving conditions
- Circuit, Drag race, Drift, Endurance, GT, Hill climb, Historic racing, Rally, Rally cross, Track days, Tuning use
- Vehicles running biofuels, especially Ethanol, up to E85
Specifications
| Viscosity | SAE J300 5W-40 |
| Viscosity Index | 176.0 (ASTM D2270) |
| HTHS Viscosity | 4.0 mPa·s @150°C (ASTM D4741) |
| Kinematic Viscosity | 78.7 mm²/s @40°C; 13.5 mm²/s @100°C (ASTM D445) |
| Density | 0.850 @20°C |
| Pour Point | -48°C / -54°F (ASTM D97) |
| Flash Point | 234°C / 453°F (ASTM D92) |
| Base Oil | 100% Synthetic (Ester Core Technology) |
| Pack Size | 10X2L |
| Size | 2L |
Directions for Use
- Ensure engine is warm before draining old oil.
- Remove drain plug and fully drain old oil.
- Replace oil filter.
- Refill with Motul product to manufacturer-specified capacity.
- Check oil level with dipstick and adjust as needed.
- Dispose of used oil responsibly at authorised collection point.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What technology does Motul 300V Competition 5W-40 use?
It uses Motul's proprietary ESTER Core® Technology, a synthetic ester base developed to maximize engine power output and wear protection without compromising reliability.
Is Motul 300V Competition 5W-40 compatible with ethanol fuels?
Yes, it is suitable for all fuel types including gasoline, Diesel and biofuels, especially Ethanol, up to E85.
Is this oil intended for street or racing use?
It is part of Motul's 300V racing line, formulated for Circuit, Drag race, Drift, Endurance, GT, Hill climb, Historic racing, Rally, Rally cross, Track days and Tuning use — consult your tuning service partner for the appropriate viscosity grade and use case.