Overview
High Performance 100% Synthetic ESTER engine oil inspired by competition, for gasoline engines, tuned or high performance, naturally aspirated or turbocharged, indirect or direct injection Operates across a wide range of engine revs and temperatures in the most severe road or racing conditions Suitable for gasoline engines requiring SAE 0W-20 and API SP oil Compatible with biofuels (especially ethanol E85) and exhaust after-treatment systems Protects downsized engines from LSPI (Low Speed Pre-Ignition); low viscosity optimizes engine response and maximum power Very good compatibility with catalytic converters Suitable for all gasoline fuel types (leaded/unleaded, ethanol, LPG) and biofuels Caution: "This type of oil may be unsuitable for use in some engines. Before use always refer to the owner's manual." (explicit TDS caution)
Compatibility
Compatibility information not available.
Key Features
- ESTER Technology: 100% synthetic, competition-derived, outstanding oil film resistance at very high temperatures for maximum power/torque and wear protection; stable oil pressure road or racing
- API SP standard: addresses LSPI/"Rumble" risk in downsized direct-injection turbocharged gasoline engines (piston damage/engine destruction risk from abnormal combustion)
- Full compatibility with biofuels: LPG, CNG, Bioethanol up to E85
- SAE 0W-20 minimizes hydrodynamic friction, delivers fuel-economy benefit especially when cold
- Faster oil flow at start-up, faster oil pressure build-up, sharper engine revs, faster engine warm-up
- Environmentally friendly: reduces fuel consumption and CO2 emissions
Applications
- Tuned/high-performance gasoline engines, naturally aspirated or turbocharged, direct or indirect injection
- Downsized turbocharged direct-injection gasoline engines at risk of LSPI/"Rumble"
- Road and racing use
Specifications
| Approvals and Standards | API PERFORMANCE SP (explicitly stated as the governing standard). No additional OEM-specific approval codes stated in this TDS. |
| Viscosity | SAE J300 0W-20 |
| Density at 20°C (68°F) | ASTM D1298 — 0.839 |
| Viscosity at 40°C (104°F) | ASTM D445 — 47.9 mm²/s |
| Viscosity at 100°C (212°F) | ASTM D445 — 8.6 mm²/s |
| Viscosity Index | ASTM D2270 — 158 |
| TBN | ASTM D2896 — 8.3 mg KOH/g |
| Pack Size | 12X1L |
| Size | 1L |
Directions for Use
Drain interval: according to manufacturers' recommendations, tune to own use (no fixed interval stated) Can be mixed with synthetic or mineral oils Before use, always refer to the owner's manual of the vehicle
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What API standard does it meet?
API SP.
Is it compatible with E85 ethanol?
Yes, up to 85% ethanol blend.
Can it be mixed with other oils?
Yes — with synthetic or mineral oils.