Overview
MOTUL 8100 POWER 5W-30 is a 100% synthetic-Ester, high-performance engine oil inspired by competition, specially designed for Gasoline or Diesel engines — tuned or high performance, naturally aspirated or turbocharged, indirect or direct injection — operating over a wide range of engine revs and temperatures, in severe road or racing conditions. It is suitable for Gasoline and Diesel engines requiring an API SP viscosity grade 5W-30 lubricant.
Compatibility
Compatibility information not available.
Key Features
- 100% Synthetic Ester engine oil inspired by competition, for tuned or high-performance Gasoline and Diesel engines
- Meets API SERVICE SP requirements, with LSPI protection for downsized direct-injection turbocharged engines
- Compatible with biofuels (Ethanol E85) and after-treatment systems, with very good compatibility with catalytic converters
- Suitable for all types of Gasoline fuels (leaded/unleaded), Ethanol, LPG, Diesel and biofuels
- High Viscosity Index (160) and low pour point (-45°C / -49°F) across a wide operating range
Applications
- Gasoline or Diesel engines, tuned or high performance, naturally aspirated or turbocharged, indirect or direct injection
- Engines operating over a wide range of revs and temperatures, in severe road or racing conditions
- Vehicles requiring an API SP viscosity grade 5W-30 lubricant
- Downsized, direct-injection turbocharged engines requiring LSPI protection
- Engines fitted with after-treatment systems and catalytic converters
- Engines running on biofuels including Ethanol E85
Specifications
| API Specification | API SERVICE SP |
| OEM Approvals | No specific OEM approvals stated on the official TDS; API SP is the governing standard. |
| Viscosity | SAE J300 5W-30 |
| Viscosity Index | 160 (ASTM D2270) |
| HTHS Viscosity | 3.2 mPa·s @150°C (ASTM D4741) |
| Kinematic Viscosity | 64.2 mm²/s @40°C; 10.8 mm²/s @100°C (ASTM D445) |
| Density | 0.844 @20°C (ASTM D1298) |
| Pour Point | -45°C / -49°F (ASTM D97) |
| Sulphated Ash | 0.84% wt (ASTM D874) |
| TBN | 7.9 mg KOH/g (ASTM D2896) |
| Flash Point | 248°C / 478°F (ASTM D92) |
| Base Oil | 100% Synthetic — Ester |
| Pack Size | 12X1L |
| Size | 1L |
Directions for Use
- Before use, always refer to the vehicle's owner manual.
- This type of oil may be unsuitable for use in some engines — always check compatibility in the owner's manual first.
- Drain and replace the oil filter, then refill with MOTUL 8100 POWER 5W-30 to the manufacturer-specified capacity.
- Change interval: according to the manufacturer's recommendations, tuned to your own use.
- Can be mixed with other synthetic or mineral oils.
- Dispose of used oil responsibly at an authorised collection point.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What standard does Motul 8100 POWER 5W-30 meet?
It meets API SERVICE SP requirements at SAE 5W-30 viscosity, with LSPI protection for downsized direct-injection turbocharged engines.
Is Motul 8100 POWER 5W-30 suitable for racing or high-performance driving?
Yes. It is a high-performance Ester engine oil inspired by competition, designed for tuned or high-performance Gasoline and Diesel engines operating over a wide range of revs and temperatures in severe road or racing conditions.
Is Motul 8100 POWER 5W-30 compatible with biofuels?
Yes. It is compatible with biofuels including Ethanol E85, and has very good compatibility with catalytic converters and after-treatment systems.