Overview
MOTUL 8100 POWER 5W-40 is a High Performance 100% Synthetic ESTER engine oil inspired by motorsport, specially designed for gasoline or diesel engines — tuned or high performance, naturally aspirated or turbocharged, indirect or direct injection — operating across a wide range of speeds and temperatures in the harshest road or racing conditions. It is suitable for gasoline and diesel engines requiring SAE 5W-40 and API SP oil.
Compatibility
Compatibility information not available.
Key Features
- ESTER Core® Technology: 100% synthetic, competition-derived, outstanding oil film resistance at very high temperatures for maximum power/torque and wear protection
- Stable oil pressure in all conditions, road or racing
- API SP standard: backward compatible with API SN and all former standards; outstanding oxidation resistance, better anti-deposit protection, better engine cleanliness, anti-wear protection, enhanced cold-temperature performance for fuel economy
- Added protection against LSPI (Low Speed Pre-Ignition) for downsized direct-injection turbocharged gasoline engines vs older API SN/SN Plus
- Full compatibility with biofuels: LPG, CNG, Bioethanol up to E85
- Resistant to high temperatures for better oil-consumption control and higher wear protection
- Faster oil flow at start-up, faster oil pressure build-up
- Very good compatibility with catalytic converters and exhaust aftertreatment systems
Applications
- Gasoline or diesel engines, tuned or high performance, naturally aspirated or turbocharged, indirect or direct injection
- Engines operating over a wide range of speeds and temperatures, in severe road or racing conditions
- Vehicles requiring an API SP viscosity grade 5W-40 lubricant
- Downsized, direct-injection turbocharged engines requiring LSPI protection
- Engines fitted with exhaust aftertreatment systems and catalytic converters
- Engines running on biofuels including LPG, CNG, and Bioethanol up to E85
Specifications
| API Specification | API SERVICE SP |
| ACEA Specification | NOT STATED — no ACEA code given on the official TDS |
| OEM Approvals | No specific OEM approvals stated on the official TDS; API SP is the governing standard. |
| Viscosity | SAE J300 5W-40 |
| Viscosity Index | 177.0 (ASTM D2270) |
| HTHS Viscosity | 3.9 mPa·s @150°C (ASTM D4741) |
| Kinematic Viscosity | 87.1 mm²/s @40°C; 14.7 mm²/s @100°C (ASTM D445) |
| Density | 0.845 @20°C |
| Pour Point | -48.0°C / -54.0°F (ASTM D97) |
| Sulphated Ash | 0.79% wt (ASTM D874) |
| TBN | 7.9 mg KOH/g (ASTM D2896) |
| Flash Point | 236.0°C / 457.0°F (ASTM D92) |
| Base Oil | 100% Synthetic — Ester |
| Pack Size | 12X1L |
| Size | 1L |
Directions for Use
Before use, always refer to the vehicle's owner manual. This type of oil may be unsuitable for use in some engines — always check compatibility in the owner's manual first. Drain and replace the oil filter, then refill with MOTUL 8100 POWER 5W-40 to the manufacturer-specified capacity. Change interval: according to the manufacturer's recommendations, tuned to your own use. Can be mixed with other synthetic or mineral oils. Dispose of used oil responsibly at an authorised collection point.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What standard does Motul 8100 POWER 5W-40 meet?
It meets API SERVICE SP requirements at SAE 5W-40 viscosity, with LSPI protection for downsized direct-injection turbocharged engines.
Is Motul 8100 POWER 5W-40 compatible with biofuels?
Yes — it is fully compatible with LPG, CNG, and Bioethanol up to E85, and has very good compatibility with catalytic converters.
Can I mix Motul 8100 POWER 5W-40 with other engine oils?
Yes, it can be mixed with other synthetic or mineral oils, though a full oil change to a single specification is recommended for best performance.