Overview
MOTUL 8100 X-CLEAN EFE 5W-30 is an advanced 100% synthetic lubricant providing high protection and fuel economy (Extra Fuel Economy / EFE) simultaneously, approved by numerous OEMs including BMW Group, Mercedes-Benz and Opel. Designed for latest-generation Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection, Euro 4/5/6 compliant, requiring an ACEA C3 (high HTHS) or ACEA C2 (low friction) oil. Compatible with catalytic converters and Diesel Particulate Filters.
Compatibility
Compatibility information not available.
Key Features
- Synthetic base stocks plus dedicated friction-modifier molecules and SAPS levels for outstanding oil film resistance, reduced friction and aftertreatment device compatibility
- High wear protection and high-temperature resistance for better-controlled oil consumption
- Supports extended drain intervals as managed by the vehicle's on-board computer
- Full compatibility with biofuels — biodiesel up to B10, or E85 unleaded gasoline
Applications
- BMW/MINI/Rolls-Royce vehicles requiring BMW Longlife-04 (models before and after 2019; BMW LL-04 gasoline use restricted to EU/Switzerland/Norway/Liechtenstein — elsewhere BMW LL-01 required)
- Mercedes-Benz "BlueTEC" Diesel engines with SCR requiring MB 229.52 (backward compatible with MB 229.51/229.31)
- Opel/Vauxhall OV 040 1547-G30 (gasoline) / D30 (Diesel) vehicles
- FIAT/Alfa Romeo/Lancia/Chrysler Multijet Diesel engines (9.55535-S1, 9.55535-S3)
- VW 505 00/505 01 Direct Injection Diesel engines (unit injector system) — not for use where VW 504 00/507 00 is required
- Recommended by Honda, Hyundai, Kia, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota
Specifications
| API Specification | API SERVICE SP |
| ACEA Specification | ACEA C2; ACEA C3 |
| OEM Approvals | BMW LL-04; Mercedes-Benz MB-Approval 229.52; Opel OV 040 1547-G30/D30; Vauxhall OV 040 1547-G30/D30 |
| OEM Recommendations & Performance Levels | Performance levels (not formal approvals): FIAT 9.55535-S1, FIAT 9.55535-S3, VW 505 00 / 505 01. Also recommended (not a formal approval) for Honda, Hyundai, Kia, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota. Note: NOT for use where VW 504 00 or 507 00 is required — use Motul SPECIFIC 504 00 507 00 or 8100 X-CLEAN+ instead. |
| Viscosity | SAE J300 5W-30 |
| Viscosity Index | 169.0 (ASTM D2270) |
| HTHS Viscosity | 3.5 mPa·s @150°C (ASTM D4741) |
| Kinematic Viscosity | 70.1 mm²/s @40°C; 12.1 mm²/s @100°C (ASTM D445) |
| Density | 0.851 @20°C (ASTM D1298) |
| Pour Point | -42°C / -44°F (ASTM D97) |
| Flash Point | 232°C / 450°F (ASTM D92) |
| Sulphated Ash | 0.78% wt (ASTM D874) |
| TBN | 7.8 mg KOH/g (ASTM D2896) |
| Base Oil | 100% Synthetic |
| Pack Size | 12X1L |
| Size | 1L |
Directions for Use
- Ensure engine is warm before draining old oil.
- Remove drain plug and fully drain old oil.
- Replace oil filter.
- Refill with Motul product to manufacturer-specified capacity.
- Check oil level with dipstick and adjust as needed.
- Dispose of used oil responsibly at authorised collection point.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
What does "EFE" mean on Motul 8100 X-CLEAN EFE 5W-30?
EFE stands for Extra Fuel Economy — the product is engineered to deliver high engine protection and fuel economy simultaneously.
Which OEM approvals does Motul 8100 X-CLEAN EFE 5W-30 carry?
BMW LL-04, Mercedes-Benz MB-Approval 229.52, and Opel/Vauxhall OV 040 1547 (G30/D30).
Can Motul 8100 X-CLEAN EFE 5W-30 be used where VW 504 00 or 507 00 is required?
No — the official Technical Data Sheet specifies using a different Motul product (SPECIFIC 504 00 507 00 or 8100 X-CLEAN+) for those requirements instead.