Liqui Moly TOP TEC 6100 0W30 1L/4L/5L
SKU: 20779
Brand: Liqui Moly
RM 630.00
5L RM 630.00 · 4L RM 520.00 · 1L RM 150.00
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Overview
A low-ash 0W-30 based on synthetic technology for modern BMW and Mercedes-Benz engines that require fuel-economy longlife oils. It reduces friction for lower fuel consumption, protects particulate filters and catalytic converters, and keeps deposits down over long service intervals. Its low viscosity gives fast oil flow at start-up. For Malaysian stop-go driving, where short trips and long idling are common, it maintains a stable film and keeps the engine clean.
Compatibility
Check the oil specification in your owner's manual and match it with the approvals above, or look up your vehicle in the LIQUI MOLY Oil Guide.
Specifications
| Pack Size | 5L |
| Per Carton | 4 |
| Viscosity | 0W-30 |
| Oil Family | TOP TEC 6100 0W30 |
| Formal Certification | ACEA C2, API SP, BMW Longlife-12 FE, DTFR 15D100, MB-Approval 229.61 |
| Meets Requirements | BMW 83 21 2 365 935/83 21 2 405 097/83 21 2 405 666, Ford WSS-M2C 957-A1, MB 227.61 |
Oil Specifications
Viscosity: 0W-30
Official Approvals
- ACEA C2
- API SP
- BMW Longlife-12 FE
- DTFR 15D100
- MB-Approval 229.61
Meets / Recommendations
- BMW 83 21 2 365 935/83 21 2 405 097/83 21 2 405 666
- Ford WSS-M2C 957-A1
- MB 227.61
Directions for Use
Manufacturer directions not available for this product — refer to the product label.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
Is Liqui Moly Top Tec 6100 0W-30 suitable for my car?
It is suitable if your owner's manual calls for BMW Longlife-12 FE or MB 229.61. Check the oil specification in your manual, not just the viscosity, and match it with the specifications listed on this page. If you are unsure, look up your car in the LIQUI MOLY Oil Guide or ask us.
Is Top Tec 6100 0W-30 good for Malaysia's hot weather and traffic jams?
Yes. The 30 hot grade covers normal operating temperatures, and its shear-stable formula keeps a steady lubricating film during long idling in traffic jams and hot afternoon drives. Always use the viscosity your manufacturer specifies.
Can I mix Top Tec 6100 0W-30 with other oils, and is it safe for turbo and DPF engines?
You can top up with another engine oil in an emergency, but use the same oil where possible: mixing with a normal-ash oil reduces the low-ash protection for particulate filters. It is a low-ash formula suitable for engines with particulate filters, and it is tested for turbochargers and catalytic converters.