MYDriveHubs

Liqui Moly TOP TEC 6200 0W20 1L/5L

SKU: 20789

Brand: Liqui Moly

RM 680.00

5L RM 680.00 · 1L RM 180.00

Configuration
Quantity

Shipping & returns

Dispatch time is confirmed via WhatsApp.

Overview

A 0W-20 low-friction oil developed for recent VW Group and Porsche engines that call for VW 508 00 / 509 00 or Porsche C20. The low viscosity cuts internal friction to save fuel, while the low-ash formula protects particulate filters. It is not backwards compatible, so use it only where the manufacturer specifies it. In Malaysian traffic and heat, it keeps these modern engines clean and well protected across the full service interval.

Compatibility

Check the oil specification in your owner's manual and match it with the approvals above, or look up your vehicle in the LIQUI MOLY Oil Guide.

Specifications

Pack Size 5L
Per Carton 4
Viscosity 0W-20
Oil Family TOP TEC 6200 0W20
Formal Certification ACEA C5, Ford WSS-M2C 956-A1, Porsche C20, VW 508 00/509 00

Oil Specifications

Viscosity: 0W-20

Official Approvals

  • ACEA C5
  • Ford WSS-M2C 956-A1
  • Porsche C20
  • VW 508 00/509 00

Directions for Use

Manufacturer directions not available for this product — refer to the product label.

Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.

FAQ

Is Liqui Moly Top Tec 6200 0W-20 suitable for my car?

It is suitable if your owner's manual calls for VW 508 00/509 00 or Porsche C20. It is not backwards compatible, so do not use it in engines that do not specify these standards. Check the oil specification in your manual, not just the viscosity, and match it with the specifications listed on this page. If you are unsure, look up your car in the LIQUI MOLY Oil Guide or ask us.

Is Top Tec 6200 0W-20 good for Malaysia's hot weather and traffic jams?

Yes, as long as your manufacturer specifies this grade. The second number (20) describes viscosity at operating temperature, so it is not too thin in tropical heat for engines designed for it. Its shear-stable formula keeps a steady lubricating film through long idling in traffic, and the low friction helps fuel economy in stop-go driving.

Can I mix Top Tec 6200 0W-20 with other oils, and is it safe for turbo and DPF engines?

You can top up with another engine oil in an emergency, but use the same oil where possible: mixing with a normal-ash oil reduces the low-ash protection for particulate filters. It is a low-ash formula suitable for engines with particulate filters, and it is tested for turbochargers and catalytic converters.