Liqui Moly MOLYGEN NEW GENERATION 0W20 1L/4L
SKU: 21357
Brand: Liqui Moly
RM 368.00
4L RM 368.00 · 1L RM 95.00
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Overview
A high-performance 0W-20 low-friction oil with Liqui Moly's Molygen additive, made for modern Asian and American petrol engines. The additive reduces friction and wear, helping save fuel and extending engine life, while unconventional base oils keep the viscosity low and shear-stable. It meets the latest API SQ and ILSAC GF-7A standards. In Malaysian traffic, where engines idle and restart constantly, it gives fast protection at every restart.
Compatibility
Check the oil specification in your owner's manual and match it with the approvals above, or look up your vehicle in the LIQUI MOLY Oil Guide.
Key Features
- smooth engine running
- optimum oil pressure under all operating conditions
- long engine service life
- reduces pollutant emissions
- tested for turbochargers and catalytic converters
- excellent wear protection
Applications
- Optimum for modern Asian and American gasoline engines with multi-valve technology and turbocharging with and without charge air cooling. For the protection and value conservation of the engine during long intervals between oil changes and when there are extreme engine requirements.
- The specifications and instructions from the assembly or vehicle manufacturer must be followed! Miscible with all commercially available engine oils. Optimum effectiveness is only possible when the product is used unmixed.
Specifications
| Pack Size | 4L |
| Per Carton | 4 |
| Viscosity | 0W-20 |
| Oil Family | MOLYGEN NEW GENERATION 0W20 |
| Formal Certification | API SQ, ILSAC GF-7A |
| Meets Requirements | Chrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 947-A/947-B1/962-A1/972-A1, GM 6094 M/dexos1 Gen 3, Honda, Hyundai, Kia, Mazda, Mitsubishi, Mitsubishi Dia Queen, Nissan, Subaru, Toyota |
Oil Specifications
Viscosity: 0W-20
Official Approvals
- API SQ
- ILSAC GF-7A
Meets / Recommendations
- Chrysler MS-6395
- Fiat 9.55535-CR1
- Ford WSS-M2C 947-A/947-B1/962-A1/972-A1
- GM 6094 M/dexos1 Gen 3
- Honda
- Hyundai
- Kia
- Mazda
- Mitsubishi
- Mitsubishi Dia Queen
- Nissan
- Subaru
- Toyota
Directions for Use
Manufacturer directions not available for this product — refer to the product label.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
Is Liqui Moly Molygen New Generation 0W-20 suitable for my car?
It is suitable if your owner's manual calls for a 0W-20 oil to API SQ / ILSAC GF-7A. Check the oil specification in your manual, not just the viscosity, and match it with the specifications listed on this page. If you are unsure, look up your car in the LIQUI MOLY Oil Guide or ask us.
Is Molygen New Generation 0W-20 good for Malaysia's hot weather and traffic jams?
Yes, as long as your manufacturer specifies this grade. The second number (20) describes viscosity at operating temperature, so it is not too thin in tropical heat for engines designed for it. Its shear-stable formula keeps a steady lubricating film through long idling in traffic, and the low friction helps fuel economy in stop-go driving.
Can I mix Molygen New Generation 0W-20 with other oils, and is it safe for turbo and DPF engines?
It can be mixed with other commercially available engine oils for topping up, but it works best unmixed. It is designed for petrol engines, including turbocharged ones, and is tested for turbochargers and catalytic converters. For diesel cars with a particulate filter (DPF), choose an oil with the ACEA C specification your manual requires.