Liqui Moly TOP TEC 4120 0W40 1L/4L
SKU: 21847
Brand: Liqui Moly
RM 520.00
4L RM 520.00 · 1L RM 150.00
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Overview
A high-tech 0W-40 low-friction oil for modern engines, including those with start-stop systems. It ensures optimum lubrication and outstanding film stability, with minimal wear and deposits even under extreme load, and it carries Mercedes-Benz approval 229.52. The combination of fast start-up flow and a robust 40 hot grade suits Malaysian driving well: frequent restarts in traffic, high ambient heat and fast highway runs, all with low fuel consumption.
Compatibility
Check the oil specification in your owner's manual and match it with the approvals above, or look up your vehicle in the LIQUI MOLY Oil Guide.
Specifications
| Pack Size | 4L |
| Per Carton | 4 |
| Viscosity | 0W-40 |
| Oil Family | TOP TEC 4120 0W40 |
| Formal Certification | ACEA C3, API SP, MB-Approval 229.52 |
| Meets Requirements | MB 229.51, Renault RN 0700/RN 0710 |
Oil Specifications
Viscosity: 0W-40
Official Approvals
- ACEA C3
- API SP
- MB-Approval 229.52
Meets / Recommendations
- MB 229.51
- Renault RN 0700/RN 0710
Directions for Use
Manufacturer directions not available for this product — refer to the product label.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
Is Liqui Moly Top Tec 4120 0W-40 suitable for my car?
It is suitable if your owner's manual calls for a 0W-40 oil to MB 229.52 or ACEA C3. Check the oil specification in your manual, not just the viscosity, and match it with the specifications listed on this page. If you are unsure, look up your car in the LIQUI MOLY Oil Guide or ask us.
Is Top Tec 4120 0W-40 good for Malaysia's hot weather and traffic jams?
Yes. The 40 hot grade gives a strong lubricating film at high oil temperatures, which helps during long idling in jams, hot weather and fast highway runs. Stay within the viscosity grades your manufacturer allows.
Can I mix Top Tec 4120 0W-40 with other oils, and is it safe for turbo and DPF engines?
You can top up with another engine oil in an emergency, but use the same oil where possible: mixing with a normal-ash oil reduces the low-ash protection for particulate filters. It is a low-ash formula suitable for engines with particulate filters, and it is tested for turbochargers and catalytic converters.