Liqui Moly MOLYGEN NEW GENERATION 10W40 1L/4L/5L
SKU: 9951
Brand: Liqui Moly
RM 450.00
5L RM 450.00 · 4L RM 368.00 · 1L RM 95.00
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Overview
A high-performance 10W-40 low-friction oil with the Molygen additive for petrol and diesel engines. It reduces friction and wear, prevents deposits and helps keep oil consumption in check, while the 40 hot grade holds a strong film under load. It is tested for turbochargers and catalytic converters. In Malaysia's hot climate and congested traffic, it gives reliable protection for everyday driving.
Compatibility
Check the oil specification in your owner's manual and match it with the approvals above, or look up your vehicle in the LIQUI MOLY Oil Guide.
Key Features
- optimum stability to aging
- outstanding engine cleanliness
- instant lubrication after cold start
- high shear stability
- friction and wear reducing
- excellent wear protection
Applications
- Best for modern gasoline and passenger vehicle diesel engines with and without exhaust-gas turbochargers. For the protection and value conservation of the engine during long intervals between oil changes and when there are extreme engine requirements.
- The operating instructions of the vehicle and engine manufacturers must be followed. Can be mixed with all commercially-available motor oils. Optimum effect obtained only when used on its own (i.e. no mixing).
Specifications
| Pack Size | 5L |
| Per Carton | 4 |
| Viscosity | 10W-40 |
| Oil Family | MOLYGEN NEW GENERATION 10W40 |
| Meets Requirements | ACEA A3/B4, API SN, Fiat 9.55535-G2, GWM, HAVAL, MB 229.3, Peugeot Citroen (PSA) B71 2300, Renault RN 0700/RN 0710, VW 501 01/505 00, Wuling |
Oil Specifications
Viscosity: 10W-40
Meets / Recommendations
- ACEA A3/B4
- API SN
- Fiat 9.55535-G2
- GWM
- HAVAL
- MB 229.3
- Peugeot Citroen (PSA) B71 2300
- Renault RN 0700/RN 0710
- VW 501 01/505 00
- Wuling
Directions for Use
Manufacturer directions not available for this product — refer to the product label.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
Is Liqui Moly Molygen New Generation 10W-40 suitable for my car?
It is suitable if your owner's manual calls for a 10W-40 oil to ACEA A3/B4, MB 229.3 or VW 501 01/505 00. Check the oil specification in your manual, not just the viscosity, and match it with the specifications listed on this page. If you are unsure, look up your car in the LIQUI MOLY Oil Guide or ask us.
Is Molygen New Generation 10W-40 good for Malaysia's hot weather and traffic jams?
Yes. The 40 hot grade gives a strong lubricating film at high oil temperatures, which helps during long idling in jams, hot weather and fast highway runs. The first number (the cold rating) matters little in Malaysia's warm climate. Stay within the viscosity grades your manufacturer allows.
Can I mix Molygen New Generation 10W-40 with other oils, and is it safe for turbo and DPF engines?
It can be mixed with other commercially available engine oils for topping up, but it works best unmixed. It is tested for turbochargers and catalytic converters. It is not a low-ash oil, so it is not the right choice for diesel cars with a particulate filter (DPF) that require an ACEA C oil.