Liqui Moly MOLYGEN NEW GENERATION 5W30 1L/4L/5L
SKU: 9952
Brand: Liqui Moly
RM 450.00
5L RM 450.00 · 4L RM 368.00 · 1L RM 95.00
Shipping & returns
Dispatch time is confirmed via WhatsApp.
Overview
A high-performance 5W-30 low-friction oil with the Molygen additive, made for Asian and American petrol engines that specify this grade. It cuts friction and wear, helps save fuel and keeps the engine clean, and it meets API SQ and ILSAC GF-7A. In Malaysia's heat and stop-go traffic, its shear-stable film keeps protecting the engine through long idling, hot afternoons and daily commutes.
Compatibility
Check the oil specification in your owner's manual and match it with the approvals above, or look up your vehicle in the LIQUI MOLY Oil Guide.
Key Features
- excellent wear resistance
- friction and wear reducing
- smooth engine running
- tested for turbochargers and catalytic converters
- outstanding engine cleanliness
- outstanding shear resistance
Applications
- Optimum for modern Asian and American gasoline engines with multi-valve technology and turbocharging with and without charge air cooling. For the protection and value conservation of the engine during long intervals between oil changes and when there are extreme engine requirements.
- The operating instructions of the vehicle and engine manufacturers must be followed. Can be mixed with all commercially-available motor oils. Optimum effect obtained only when used on its own (i.e. no mixing).
Specifications
| Pack Size | 5L |
| Per Carton | 4 |
| Viscosity | 5W-30 |
| Oil Family | MOLYGEN NEW GENERATION 5W30 |
| Formal Certification | API SQ, ILSAC GF-7A |
| Meets Requirements | Chrysler MS-6395, Daihatsu, Fiat 9.55535-CR1, Ford WSS-M2C 946-A/946-B1/961-A1/971-A1, GM 6094 M/dexos1 Gen 3, GWM, HAVAL, Honda, Hyundai, Isuzu, Kia, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota, Wuling |
Oil Specifications
Viscosity: 5W-30
Official Approvals
- API SQ
- ILSAC GF-7A
Meets / Recommendations
- Chrysler MS-6395
- Daihatsu
- Fiat 9.55535-CR1
- Ford WSS-M2C 946-A/946-B1/961-A1/971-A1
- GM 6094 M/dexos1 Gen 3
- GWM
- HAVAL
- Honda
- Hyundai
- Isuzu
- Kia
- Mazda
- Mitsubishi
- Nissan
- Subaru
- Suzuki
- Toyota
- Wuling
Directions for Use
Manufacturer directions not available for this product — refer to the product label.
Installation and usage guidance is general reference only. Manufacturer instructions take precedence. Visitors uncertain about installation or use should seek professional advice.
FAQ
Is Liqui Moly Molygen New Generation 5W-30 suitable for my car?
It is suitable if your owner's manual calls for a 5W-30 oil to API SQ / ILSAC GF-7A. Check the oil specification in your manual, not just the viscosity, and match it with the specifications listed on this page. If you are unsure, look up your car in the LIQUI MOLY Oil Guide or ask us.
Is Molygen New Generation 5W-30 good for Malaysia's hot weather and traffic jams?
Yes. The 30 hot grade covers normal operating temperatures, and its shear-stable formula keeps a steady lubricating film during long idling in traffic jams and hot afternoon drives. Always use the viscosity your manufacturer specifies.
Can I mix Molygen New Generation 5W-30 with other oils, and is it safe for turbo and DPF engines?
It can be mixed with other commercially available engine oils for topping up, but it works best unmixed. It is designed for petrol engines, including turbocharged ones, and is tested for turbochargers and catalytic converters. For diesel cars with a particulate filter (DPF), choose an oil with the ACEA C specification your manual requires.